Today when I tried to start my Atomic 4, the engine would start with full choke and then die immediately when I started to close the choke.
I removed the carburetor drain plug and drained the sediment bowl into a small jar.
The gas in the jar was loaded with small red threads and specks of what appears to be some type of thread sealant. My guess is that one of these specks may be clogging a gas jet.
My question is: Should I put the drain plug in the carburetor with some kind of washer, thread sealant, Teflon tape, or just put it in plain and dry?
Thanks for the help...
I removed the carburetor drain plug and drained the sediment bowl into a small jar.
The gas in the jar was loaded with small red threads and specks of what appears to be some type of thread sealant. My guess is that one of these specks may be clogging a gas jet.
My question is: Should I put the drain plug in the carburetor with some kind of washer, thread sealant, Teflon tape, or just put it in plain and dry?
Thanks for the help...
Comment