Update 9/11/2011 - As hard as I try I cannot get the pulley that drives the raw water pump to align with the PTO pulley on the fly wheel. As a result, the raw water pulley wobbles - creating enough imbalance and vibration to cause scoring on the shaft by the pins holding the pulley. I know the manual for the MMI FWC kit said it isn't necessary to get them to line up exacty. It's lined up with the PTO pulley, but there is a noticable difference in the angle of the pulleys.
I decided to scrape the whole thing for now because the noise is intolerable and I'm concerned about damaging the pump and the system failing. So farr I can't find where anyone has had difficulty with the system. What am I doing wrong?
I decided to scrape the whole thing for now because the noise is intolerable and I'm concerned about damaging the pump and the system failing. So farr I can't find where anyone has had difficulty with the system. What am I doing wrong?
Comment