I have a 1977 Atomic 4 on my Cal 30. The old standpipe exhaust system bit the dust or rust! I want to run a dry pipe from the exhaust manifold and then use the raw water exhaust as the coolant. This will run directly overboard, no muffler, etc. I have sufficient fall (slope) from the engine exhaust water to ensure no backflow. Pic attached showing the assembly.
Basicially the same as the MMI Catalina preassembled exhaust but with a 3" pipe turning outboard from the engine exhaust flange.
Any thoughts on why this won't work? Many thanks.
Gregg
Basicially the same as the MMI Catalina preassembled exhaust but with a 3" pipe turning outboard from the engine exhaust flange.
Any thoughts on why this won't work? Many thanks.
Gregg
Comment