Crank?
By the way - is there a way to crank the engine without using the crank tool supplied by moyer?
my problem is that in my boat there is plenty of clearance to port, stbd and aft of the engine, but only about an inch of clearance forward of the flywheel. I really want to manually crank the engine to inspect the valves as they move through each stroke, but not sure how to accomplish this with my situation.
By the way - is there a way to crank the engine without using the crank tool supplied by moyer?
my problem is that in my boat there is plenty of clearance to port, stbd and aft of the engine, but only about an inch of clearance forward of the flywheel. I really want to manually crank the engine to inspect the valves as they move through each stroke, but not sure how to accomplish this with my situation.
Comment