My A4 has been slipping in forward lately but this can be corrected by putting some pressure on the shift lever. I suspected that I might need to increase the pressure on the pressure plates so I intended to turn the adjusting collar one notch clockwise but i could not get the collar to turn in either direction. I have the transmission in a good neutral position and I removed the screw that sits in the notch . It's hard to apply alot of pressure to the adjusting collar but based on the comments of others it doesn't seem like it should require much pressure to turn the collar. How much pressure is needed to turn this thing? Is there a specific tool to use to turn the adjusting collar?
Thanks!
Mark Thompson
Ericson 32
Thanks!
Mark Thompson
Ericson 32
Comment