Finally got all parts to rebuild the hot section of my leaking exhaust and just started trying to unscrew the bolts. Those are pretty rusty. I'll continue spraying with PB but it does not look like I'll be able to get them lose. It's not easy to reach them with a wrench. I would not dare to heat those with a torch near the fuel lines and the gas tank.
So, I thought to take the manifold off along with the exhaust is not a bad idea. I should be able to do something with the stuck bolts in my garage.
It looks like I just need to unscrew the three nuts on the side and take the carb off.
So, I thought to take the manifold off along with the exhaust is not a bad idea. I should be able to do something with the stuck bolts in my garage.
It looks like I just need to unscrew the three nuts on the side and take the carb off.
Comment