I have water squirting out three of the four cylinders and figure I must have at the very least a head gasket blown.
The raw water intake is shut off and I have even disconnected the water line from the heat exchanger to the pump on the motor but still have water squirting out. I know it is not from the raw water side as I have taken the top off the strainer and sucked the water out of that below the line to the heat exchanger. Based on what I have read here I am now faced with removing the head. What I would like to know is why I am still getting water, and lots of it out the sparkplug hole when I turn over the motor, and if there is anything else I might be looking at in terms of additional repairs, or is it time to pull the old girl for a rebuild. Scott
The raw water intake is shut off and I have even disconnected the water line from the heat exchanger to the pump on the motor but still have water squirting out. I know it is not from the raw water side as I have taken the top off the strainer and sucked the water out of that below the line to the heat exchanger. Based on what I have read here I am now faced with removing the head. What I would like to know is why I am still getting water, and lots of it out the sparkplug hole when I turn over the motor, and if there is anything else I might be looking at in terms of additional repairs, or is it time to pull the old girl for a rebuild. Scott
Comment