Anyone use tags like this?

[joe_db]

This looks like a handy thing to prevent mixing up wires.

https://www.amazon.com/ACCEL-170018-Ignition-Wire-Marker/dp/B001HQC8U6/ref=sr_1_2?crid=2GWO248B46INK&keywords=spark%2Bplug%2Bwire%2Bnumber%2Btags&qid=1695734927&sprefix=spark%2Bplug%2Bwire%2Bn%2Caps%2C74&sr=8-2&th=1

[Dave Neptune]

Good find

Joe, I have not used those type of clips and they do look like a great idea. I usually use custom fit wires for the application when ever possible, that way there is pretty much only one way they fit. On my hot rod I have a MSD ign and "fit numbered wires". The plug number is actually in the wire lettering IE no mistakes. Another method is fabricating your own wires by routing clean and cutting to length.

I have been using Amazon for many performance parts on my 27 all steel Ford on Ford bucket roadster. Sometimes they are a few dollars more however they are shipped and delivered much faster.

Dave Neptune

[msmith10]

I've had those on my wires for years. They help, especially when you're in a hurry.

[Sam]

They look very neat and reliable. Currently I just use small strips of heavy duty duct tape on each wire with the 1-2-4-3 sequence labeled with permeant marker.