I need a short piece of Silicone exhaust hose. I just need about 5" and wonder if anyone had a leftover piece to sell. The ID is 1.5". The best I can find is a 3' piece for $100.
Anyone have a 5" piece of Silicone exhaust hose to sell? 1.5"
Collapse
This topic is closed.
X
X
-
Unfortunately not. I'm in an urban marina in Baltimore and there is no yard, just piers and condos. There are boatyards around town but it would be difficult to convince a yard owner to let me crawl around on old boats in "search of" I think.
I was just hoping someone had a scrap left over from a longer piece that they'd like to sell. It looks like you have to buy 3' sections and you don't always need that whole piece. As expensive as it is, a short scrap has value.Rob--
"Who is staring at the sea is already sailing a little."
1968 C&C Invader 36' / Late Model Atomic4
https://www.tumblr.com/sherloch7
sigpic
Comment
-
-
I was almost at the end of the internet when I found this out near Neil:
HPS 1.5" 38mm High Temperature Reinforced Straight Silicone Coupler Hose meet and exceed SAEJ20 industry standards, ideal for automotive, diesel trucking, industrial, marine, custom turbo or intercooler piping fabrication, DIY air intake kit, charge air cooler (cac), radiator and heater cooling system. Available in 3" 4" 6" 1 foot 3 feet length.
says it's only four-inches, but there is a phone number to call.sigpic Whiskeyjack a '68 Columbia 36 rebuilt A-4 with 2:1
"Since when is napping doing nothing?"
Comment
-
-
I found a trucking repair shop that sold me a hose. It was 3' for $52. I only neeed 4" but now I have enough to last me the rest of my life.Rob--
"Who is staring at the sea is already sailing a little."
1968 C&C Invader 36' / Late Model Atomic4
https://www.tumblr.com/sherloch7
sigpic
Comment
-
Comment