Tweet
Looking for a good block, prefer FW cooled or let me know what you have.
John halper
John halper
-
-
Atomic4 enquiry
We are removing an Atomic 4 #197384, model #5101 from our pearson 30 in late March 2010.The Motor is complete less a fuel pump.It appears to be in good condition and although it has not run for 4 years turns over easily and has had some care.It would be low hours (the history of the boat).We have other plans for the drive train and would hate to see this donk go to waste.Its raw water cooled so it might not suit.Its in south Portland Maine.
Enquiries to
antin04@hotmail.com
anthony innes -
Rare quality block
John, I have a block that is excellent, acquired as a core exchange from an installation i just completed. It has six or better threads at manifold stud holes. I'm in the L. A. area, Redondo Beach. It's actually complete less head manifold and dist.
MichaelComment
Comment