Does anyone know what size and grade bolts fit this. Had to cut mine out. I think they are a 3/8" fine thread, but not sure of length.
Direct Drive Prop Shaft Coupler
Collapse
X
-
3/8-24 UNF is correct. Length depends on your coupling. Measuring mine wouldn't help you as I have a DriveSaver that uses socket head cap screws.
And FWIW, DriveSaver sent the wrong length cap screws with the unit (and no high collar lock washers).
Go with the Grade 8 fasteners, not much more expensive and probably easier to find (NAPA) than the Grade 5s. Oh yeah, Grade 8s have 5 slash marks on the head (figure the logic in that??).
You'll probably have to buy the bolts a little long then trim them down with a grinder (or else add washers). You want a full thread coming through the transmission flange, but not much more than that.
Hey, at least there's only 3 of them (unless you have a reduction gear).
-
Comment