Has anyone installed the extended dipstick? I have to lean over my engine and it is not fun when hot.
Moyer Dipstick Kit?
Collapse
X
-
Joe, I have changed a few dip stick tubes over the years. Tapping them into the seat requires patience and a light touch. Be sure the tube is clean of any rust or paint up to the seat. A bit of Av grade is not a bad idea to help it slip in. Light tapping on a clamp ABOVE the seat works well too depending on access.
I can't imagine the MMI replacement would be much different. The MMI stuff usually works quite well.
Dave Neptune
-
-
Originally posted by Dave Neptune View PostJoe, I have changed a few dip stick tubes over the years. Tapping them into the seat requires patience and a light touch. Be sure the tube is clean of any rust or paint up to the seat. A bit of Av grade is not a bad idea to help it slip in. Light tapping on a clamp ABOVE the seat works well too depending on access.
I can't imagine the MMI replacement would be much different. The MMI stuff usually works quite well.
Dave NeptuneJoe Della Barba
Coquina
C&C 35 MK I
Maryland USA
Comment
-
-
-
I installed it last fall and it's one of my favorite upgrades. I love it as well. Easy to do and no issues.Rob--
"Who is staring at the sea is already sailing a little."
1968 C&C Invader 36' / Late Model Atomic4
https://www.tumblr.com/sherloch7
sigpic
Comment
-
Comment