I'm swapping in a new A4 into my daughter's tartan. Due to a frozen prop shaft coupling, and because I need to use the old reversing with the new engine, I'm trying to leave the entire reversing gear mechanism in place and swap in the rest of the engine. To do this, I need to separate the top housing off the mechanism. I assumed I'd remove the two set bolts holding the shifter shaft onto the shift bracket then slide the shaft out. No dice, the shaft and bracket are still firmly connected. What am I missing? How do I slide that shaft out so I can remove the upper case while leaving the reversing gear in place? Here's a pic of what I'm dealing with:
HELP! I need to get this worked out tomorrow!
Thanks
HELP! I need to get this worked out tomorrow!
Thanks
Comment