So after a couple of days of doing a few things (flush, electric fuel pump conversion, new OPSS, cleaning carb, new fuel filter/separator unit, fuel hoses) to get it ready for first start in a few years, I am not getting fuel priming from the pump
Here's the story:
I had my old extra fuel pump from Destinada around so I went ahead and used it...But got no kind of priming/pumping...I did not get the usual ticking noise I get when I used to on Destinada telling me the pump is sending fuel...Tried bypassing the OPSS as well...Nothing
So I went and pulled the newer pump from Destinada to see if I just had a bad pump but also got nothing...
So I thought, that eliminates the fuel pump being bad...and started looking at the coil...I noticed this odd piece in the attached picture that I am not quite sure what it is...It is not on Destinada's A4 so contemplated yanking it...I touched the connections and they seem really flimsy on this contraption...
Any ideas what this is and how to yank it and retrofit the existing cables going to it?
Comment