Let's summon him back over, I'd like to put my boat back in the water. Was just curious if 1/2" would be fine or if going to a 5/8 would be more trouble than it was worth if you had to expand the hole.
Pearson did a wonderful job on the external hull to deck flange, there's a couple of spots where the hull is almost flush with the edge of the deck. Is this to be concerned with? I don't foresee being able to get it pushed back in.
Pearson did a wonderful job on the external hull to deck flange, there's a couple of spots where the hull is almost flush with the edge of the deck. Is this to be concerned with? I don't foresee being able to get it pushed back in.
Comment