If anybody has any pictures of an A-4 in a Columbia 31, I need to make up the engine bed.....I worked on one a few years ago and if I recall it was "hard mounted" without engine mounts......
I have a 1970 Tartan 34C. The engine is hard mounted to two longitudinal
molded fiberglass rails by studs that are screwed into holes drilled into
the glass. The studs are capped by washers and nuts with small shims
underneath as required.
I bought some replacement studs like this from McMaster Carr. They can
help you select them. for the ones replaced, I poured some west system epoxy strengthened with micofibers
into the holes prior to threading the studs in.
Comment