Great find, edwardc. A bearing puller is an incredibly satisfying tool to use in situations like this - especially a cheap one! I would not have guessed HF offered one small enough for this purpose - for $20 this should be considered the job’s standard tool. Forget the bent screwdriver!
I own a large two-arm puller (not HF) for stubborn brake rotors, which, after all curse words have failed, works amazingly to the point of cracking an entire rotor off like a dry cookie. Also, a set of smaller 3-arm HF pullers that a few weeks ago sweet-talked a Vespa’s stuck CVT pulley off its splined shaft like a Sunday walk in the park.
I own a large two-arm puller (not HF) for stubborn brake rotors, which, after all curse words have failed, works amazingly to the point of cracking an entire rotor off like a dry cookie. Also, a set of smaller 3-arm HF pullers that a few weeks ago sweet-talked a Vespa’s stuck CVT pulley off its splined shaft like a Sunday walk in the park.
Comment