I have a Newport 30 that has failed to start many times after sailing in a sea. After much frustration I have realized water is coming back up the exhaust system and into the engine. It seems like I need an anti siphon device to solve the problem. there was one there but apparently it wasn't doing the job, seawater was dripping into the carburetor from the cylinders. Access to the exhaust system is a problem. I have a few ideas but I am looking for suggestions. I think I should make the loop go has high as possible unless there is a product out there that will solve the problem.
Anny suggestions.
Here is a picture of the exhaust muffler I took off the engine. I felt the loop just wasn't high enough but I am just unsure thanks
Anny suggestions.
Here is a picture of the exhaust muffler I took off the engine. I felt the loop just wasn't high enough but I am just unsure thanks
Comment