Recently I noticed my ammeter gauge was indicating 0. When I got stopped
and took a look at things I saw the output wire had come apart at
a connector (hint -- do not use electical tape near a hot motor -- it
will get soft and lose its grip).
Presumable the diodes are kaput. Is this something I can fix myself
if I can get the right part or should I have a shop do it?
-jonathan
and took a look at things I saw the output wire had come apart at
a connector (hint -- do not use electical tape near a hot motor -- it
will get soft and lose its grip).
Presumable the diodes are kaput. Is this something I can fix myself
if I can get the right part or should I have a shop do it?
-jonathan
Comment