Hey All,
I have a Palmer P-60 and I am replacing the old rusted metal fuel line from the fuel pump to the carburetor. Since the carburetor and fuel pump are the same as the A4 I hope folks don't mind that I am posting here.
I thought I only needed a standard fuel hose but then I came across this picture of a Palmer P60 with a similar setup. Half way in the fuel line is what looks like some kind of fitting (I've circled it red). Does anyone know what this is and if I need something similar? Could it be an anti-siphon fitting? Any information would be great!
Thanks!
-Brian
I have a Palmer P-60 and I am replacing the old rusted metal fuel line from the fuel pump to the carburetor. Since the carburetor and fuel pump are the same as the A4 I hope folks don't mind that I am posting here.
I thought I only needed a standard fuel hose but then I came across this picture of a Palmer P60 with a similar setup. Half way in the fuel line is what looks like some kind of fitting (I've circled it red). Does anyone know what this is and if I need something similar? Could it be an anti-siphon fitting? Any information would be great!
Thanks!
-Brian
Comment