just had my first summer with the a4. love it! since I am refurbishing the whole boat I decided to pull the motor and go thru it and give it some updates. after disassembling much of the motor I have a few questions
. first, which end of the engine is the front? all of the pistons are in the correct holes 1234. how ever all of the arrows on the pistons point towards the transmission end . I should mention this is a late model direct drive. are they in the correct orientation ?
secondly ,compression test was done after I removed motor and so I had to hand crank . cylinders 1 thru 4 are as follows 63,63,68,69 high/low ???
what's my best move?
. first, which end of the engine is the front? all of the pistons are in the correct holes 1234. how ever all of the arrows on the pistons point towards the transmission end . I should mention this is a late model direct drive. are they in the correct orientation ?
secondly ,compression test was done after I removed motor and so I had to hand crank . cylinders 1 thru 4 are as follows 63,63,68,69 high/low ???
what's my best move?
Comment