View Single Post
  #1   IP: 104.249.229.37
Old 01-20-2018, 08:15 PM
Jimmy Jimmy is offline
Senior Member
 
Join Date: Aug 2011
Location: London Ontario
Posts: 125
Thanks: 3
Thanked 15 Times in 5 Posts
OPSS Switch question

Greetings - a couple questions as I upgrade to a electric fuel pump (working with the MM conversion kit)

1) the brass plug I need to remove to install the OPSS is giving me grief. Instead of fighting this any longer, I got a bright idea.....wondering if I can add the OPSS to the same outlet as the Oil Pressure sending unit. To avoid any extreme torque on that location, I would use a “AN” fitting, and remotely mound the sending unit and OPSS. Any reason this won’t work?

2) I am adding a fuel shutoff solenoid. Any reason I can’t power this off the coil “+” terminal ? Turn off the engine, solenoid closes. This is over and above the valve on top of the tank.

As always, I value, and appreciate the input of this group.

Cheers
Jimmy
__________________

Jimmy
C&C 29 MK1
Erieau , Lake Erie
Reply With Quote