I installed a new rotor, new distributor cap, new wires, checked the valves in cylinder 1, both working. I tried an acid flush of the cooling system and gapped a plug at .040 and I have a clean burning cylinder one. I went through a box of 4 plugs and the last one was #5. I wonder if I had a bad box of plugs or a obstruction in the exhaust system?
In any case, Thanks for all the advice! I'l keep you posted once I get a few hours on it.
In any case, Thanks for all the advice! I'l keep you posted once I get a few hours on it.
Comment