#1
IP: 64.229.41.109
|
||||
|
||||
How Do I ....
So.... got the A4 back in the Alberg 30, but trying to align the couplings is proving very frustrating in the small engine space.
It's a different A4 than came out. I have some pics showing the old engine's shims at the flywheel end, but no pics from the transmission end. I have the rubber pads on but that seems to raise it way too high for proper alignment at the tranny end. The previous engine even had aluminium shims which I haven't added yet since the rubber pads look too much! 1/ what size bolts and how long for mounting to the stringers ? Some were missing when I got the boat 2/ any simple tips or tricks to make this easier ? 3/ the 0.002 coupling tolerance- is this measured before bolting them together ? |
|
|