|
#1
IP: 38.118.52.41
|
||||
|
||||
Exhaust wrap kit
We just added an exhaust wrap kit to our product line.
Each kit includes 15 feet of 2" wrap and two end clamps. The wrap is 1/16" thick and is usually sufficient to cover 4 to 5 feet of the 1-1/4" piping commonly used in constructing the hot section of an exhaust system. When the wrap is used so that there is approximately 1/4" of overlap, the temperature radiating from the pipe is reduced by 50 to 60 %. When a pipe comes within close proximity to a cockpit floor or other structure, the wrap can be used in two layers. Don Last edited by Don Moyer; 06-04-2006 at 08:17 AM. |
#2
IP: 108.67.214.15
|
||||
|
||||
so...
Hi Don, so is this for use in wrapping the flexible exhaust hose portion?
|
#3
IP: 68.49.96.248
|
||||
|
||||
No, this is for wrapping the hot pipe section. By the time the flexible rubber exhaust hose starts, the water injection has lowered the exhaust temp.
|
#4
IP: 72.235.216.189
|
||||
|
||||
It's used to wrap the HOT EXHAUST section.
See attached pic...
__________________
-Jerry 'Lone Ranger' 1978 RANGER 30 |
#5
IP: 71.174.51.6
|
|||
|
|||
Jerry,
I like the design of this system, can you tell me how you hooked up the exhaust water hose |
#7
IP: 173.53.23.94
|
||||
|
||||
I made my own little "injection port" when I cobbled up my hot section. A standard black iron "T" with an adapter bushing and a hose barb.
__________________
- Bill T. - Richmond, VA Relentless pursuer of lost causes |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Exhaust Pipe Wrap | Bill Fields | General Maintenance | 33 | 11-30-2014 11:18 AM |
New exhaust system | jsedivy | Exhaust System | 11 | 08-01-2011 07:50 PM |
Exhaust wrap. | Badger, C-27, N.H. | Exhaust System | 2 | 03-12-2006 06:34 PM |
Copper waterjacketed exhaust | BBH | Exhaust System | 4 | 11-25-2005 10:10 PM |
manifold water leak v/s exhaust waterjacket leak, or BOTH | alkaid | Exhaust System | 1 | 08-23-2005 02:36 PM |