#1
IP: 76.201.169.46
|
||||
|
||||
Cooling plate stud repair kit, advice?
Hello collective wisdom people,
I've decided to use the MMI cooling plate stud repair kit for my bottom four bolts. Any advice for doing that? I've looked at previous threads, and instructions will come with, but if you have any helpful hints, I'd love to hear them. Also, I now know that it's a hell of a lot easier to remove that cooling plate with the alternator off, rather than with the alternator in place....duh! Thanks!
__________________
Rick Powers Palo Alto, CA 1976 Catalina 27 |
#2
IP: 70.208.132.6
|
||||
|
||||
Rick,
I'm attaching an advance copy of the instructions you'll be receiving with the kit which (along with advice from those who have recently used the kit) should assist you in preparing yourself intellectually and emotionally for the work ahead. Don |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Defective Head/Manifold Studs | Don Moyer | General Interest | 2 | 09-29-2021 07:43 PM |
Cooling maxed out | sonador | Cooling System | 3 | 06-12-2008 07:22 PM |
Question about taps in repair stud kit | Baltimore Sailor | General Interest | 14 | 05-21-2008 09:30 AM |
Stud repair kit | duggskullery | Aftermarket Kits and Accessories | 3 | 08-29-2007 10:06 AM |
side plate bolt dimensions | m_galligan | Cooling System | 0 | 07-30-2007 01:03 AM |