Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Drive Train / Propellers

Reply
 
Thread Tools Display Modes
  #1   IP: 35.182.176.234
Old 08-09-2022, 02:28 PM
velowe velowe is offline
Frequent Contributor
 
Join Date: Sep 2010
Location: Grimsby, Ontario, Canada
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
Engine/ transmission Problem

2 things are happening.
1) When I shift into reverse rpm's drop by 300 but in forward, it drops by 800-1000rpm and I have to throttle up.

2) Last time out, the transmission slipped out of forward and I only had reverse.
Reply With Quote
  #2   IP: 209.6.152.28
Old 08-09-2022, 04:37 PM
TimBSmith TimBSmith is offline
Afourian MVP
 
Join Date: Aug 2020
Location: Brookline, MA USA
Posts: 145
Thanks: 1,905
Thanked 56 Times in 35 Posts
Transmission adjustment and Moyer Manual

Not sure if you have Moyer Maintenance Manual. If not, get it.

I have not needed to make transmission adjustments yet. I have been monitoring my transmission and so far nominal operation.

I have studied the adjustment to the forward gear and stabilizing detente position and reverse friction using direct drive transmission adjustments.

Here is an old and useful thread with several sublinks.
https://www.moyermarineforum.com/for...ead.php?t=6218

Reversing Gear Video
https://www.youtube.com/watch?v=B7Qc0HZ2juA

Until next. Fair winds.
__________________
Tim Smith
Oasis
Pearson 30
1974, Number 572
Boston, MA USA
Reply With Quote
  #3   IP: 32.211.38.220
Old 08-10-2022, 08:26 PM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 1,926
Thanks: 12
Thanked 522 Times in 370 Posts
Sounds like an issue with the shift cable or it's adjustment.
Recommend to take the cover off the transmission (engine off) and see how the shifter stuff is moving. When shifting into fwd, you'll see the shifter cone moving aft. Do the pawls engage fully? They should snap into place in the groove in the cone.
When shifting into reverse, does the cone move fully forward? It should almost contact the fwd adjustment collar. If it doesn't, try backing off the reverse adjustment nut and see if it moves further.
A lot of shifting problems are due to the cable, its mounting, and its adjustment. The core of the cable has to move freely. The jacket of the cable has to be secure at each end.
Reply With Quote
The Following 3 Users Say Thank You to Al Schober For This Useful Post:
Drey (09-07-2022), Sam (08-10-2022), TimBSmith (08-10-2022)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Request advice with stalling engine Jon K Troubleshooting 20 09-02-2012 10:45 AM
Perplexing engine dying problem rpowers Troubleshooting 20 06-17-2010 11:30 PM
Engine Sputters and Coughs, and Needed Choke to Run Smooth CaptainChas Troubleshooting 9 06-30-2009 11:50 PM
Engine won't start...problem solved on forum gary gerber Troubleshooting 0 05-24-2009 06:05 PM
Removing the engine from your boat Don Moyer Ranger 7 12-12-2005 01:24 PM


All times are GMT -4. The time now is 08:56 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2022 Moyer Marine Inc.

All Rights Reserved