#1
IP: 76.69.120.181
|
|||
|
|||
R terminal on starter question
Can anyone confirm proper functionality of the "Start isolation" feature of the BLUE SEA SI-ACR when the SI wire is connected to the R terminal on a late model Atomic 4 starter solenoid, as opposed to running said wire all the way back to the instrument panel mounted starter switch?
Thanks JP |
#2
IP: 47.16.178.29
|
||||
|
||||
I have 'R' terminal connected directly to mACR starter isolation. I don't know how to prove that its functioning correctly, but I did not have any issues.
__________________
Alex 1976 Catalina 30 Perth Amboy, NJ |
Tags |
ACR, start isolation, starter |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Broken S terminal on starter solenoid | cdhickey | General Maintenance | 3 | 11-27-2017 09:30 AM |
Starter removal & a novice question | blhickson | Ignition System | 8 | 11-20-2014 10:37 PM |
Starter Barely Engages with Flywheel | skhorleb | Ignition System | 15 | 02-04-2012 02:25 AM |
Possible starter ring problem? | skhorleb | General Maintenance | 2 | 06-05-2010 12:12 AM |
Will fire only with starter engaged | vwalker | Troubleshooting | 1 | 08-10-2007 05:02 PM |