Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Owner Discussion Groups > Discussion Groups > Ranger

Reply
 
Thread Tools Display Modes
  #1   IP: 216.175.98.110
Old 12-28-2006, 11:06 PM
bobash bobash is offline
Senior Member
 
Join Date: Oct 2004
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
Motorola 35 Belt Not Coming Out

Don:

Having removed the original Motorola and with your new Mando 55 and its new 26" belt in hand to install, I 'm not able to wiggle the old belt out. It's hung up on something I can't see because there's no room to look (Ranger 33).

I don't want to cut the old belt as I have no assurance that will give me access to install the new old. And then I'd have to reverse the process and settle for
a beer.

Do I have to remove something that is the hang-up, like water pump or distributor? Say it isn't so.

Bob
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Motorola 35 Belt Not Coming Out bobash Electrical 1 12-29-2006 09:00 AM
Motorola blown diodes jhwelch Electrical 1 10-18-2006 05:47 PM
no water coming out the back plenty of it in oil?? autorot8 Troubleshooting 3 03-24-2006 08:19 AM
Can't tighten alternator belt! joec43 Electrical 3 07-23-2005 03:28 PM
Noise coming from the transmission Unregistered Reversing Gear 1 03-28-2005 09:57 AM


All times are GMT -4. The time now is 10:47 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.


Universalģ is a registered trademark of Westerbeke Corporation

Copyright © 2004-2023 Moyer Marine Inc.

All Rights Reserved