Box of Atomic 4 parts-Free

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Crazer
    Senior Member
    • Sep 2011
    • 96

    Box of Atomic 4 parts-Free

    Having exited the Atomic 4 community a couple of years ago when I bought my Cape Dory 28, and in no apparent danger of going back soon (my dreams of an A4 powered motor launch not withstanding) I'd like to offer up a box of accumulated Atomic 4 parts for free to anyone in the community who would like to come get them. The box includes miscellaneous early and late model parts (but mostly early) including an apparently complete early model mechanical fuel pump, a partial early model fuel pump, some carb parts, an early model starter and some impellers etc. The big get will be a new looking belt driven water pump and an older heat exchanger for a fresh water cooling conversion. I am located in North East Baltimore off 95, but will meet someone within a reasonable distance (Annapolis or Sparrows Point are especially easy for me). I'm not too interested in shipping just because I don't know how I'd pack this stuff safely and since it's heavy, it probably would be cost prohibitive for the taker.
    -Avery

    Rhodes Swiftsure 33 SV “Clio”
    Sparrow’s Point, MD
  • joe_db
    Afourian MVP
    • May 2009
    • 4474

    #2
    Originally posted by Crazer View Post
    Having exited the Atomic 4 community a couple of years ago when I bought my Cape Dory 28, and in no apparent danger of going back soon (my dreams of an A4 powered motor launch not withstanding) I'd like to offer up a box of accumulated Atomic 4 parts for free to anyone in the community who would like to come get them. The box includes miscellaneous early and late model parts (but mostly early) including an apparently complete early model mechanical fuel pump, a partial early model fuel pump, some carb parts, an early model starter and some impellers etc. The big get will be a new looking belt driven water pump and an older heat exchanger for a fresh water cooling conversion. I am located in North East Baltimore off 95, but will meet someone within a reasonable distance (Annapolis or Sparrows Point are especially easy for me). I'm not too interested in shipping just because I don't know how I'd pack this stuff safely and since it's heavy, it probably would be cost prohibitive for the taker.
    I'm in for it!
    Annapolis is easy for me and Sparrows Point not too bad.
    Joe Della Barba
    Coquina
    C&C 35 MK I
    Maryland USA

    Comment

    • Marian Claire
      Afourian MVP
      • Aug 2007
      • 1768

      #3
      I know I am late to the party. I find myself in need of a early model main nozzle. If there is one in this batch of parts I would like to try and work something out. On our last extended trip the A-4 started surging. Normal RPM then dropping then back to normal as we moved thru choppy waves on the nose. Long story short. It turns out that the main nozzle had developed some cracks in the tube that I think was causing an air leak leading to the RPM variations. I was able to use parts I had aboard to get her up and running properly. I just need the nozzle to make my spare carb functional again. I see that MMI sales the late model nozzle as part of the rebuild kit but not as part of the early kit. Does anyone know if they are interchangeable?
      Dan
      S/V Marian Claire

      Comment

      • joe_db
        Afourian MVP
        • May 2009
        • 4474

        #4
        Originally posted by Marian Claire View Post
        I know I am late to the party. I find myself in need of a early model main nozzle. If there is one in this batch of parts I would like to try and work something out. On our last extended trip the A-4 started surging. Normal RPM then dropping then back to normal as we moved thru choppy waves on the nose. Long story short. It turns out that the main nozzle had developed some cracks in the tube that I think was causing an air leak leading to the RPM variations. I was able to use parts I had aboard to get her up and running properly. I just need the nozzle to make my spare carb functional again. I see that MMI sales the late model nozzle as part of the rebuild kit but not as part of the early kit. Does anyone know if they are interchangeable?
        Dan
        S/V Marian Claire
        I am mainly after the cooling parts. I can send the carb parts onward.
        Joe Della Barba
        Coquina
        C&C 35 MK I
        Maryland USA

        Comment

        • Marian Claire
          Afourian MVP
          • Aug 2007
          • 1768

          #5
          Thanks. I will PM you with info.
          Dan
          S/V Marian Claire

          Comment

          • Marian Claire
            Afourian MVP
            • Aug 2007
            • 1768

            #6
            Just wanted to say thank you to Joe, Crazer and this forum. Joe sent me the carb parts and the main nozzle is a exact match to replace my damaged one. Thanks to all.

            Dan
            S/V Marian Claire

            Comment

            • joe_db
              Afourian MVP
              • May 2009
              • 4474

              #7
              And I have an old-style starter for anyone that needs it. Shipping it will be $$$, it is heavy.
              Joe Della Barba
              Coquina
              C&C 35 MK I
              Maryland USA

              Comment

              Working...
              X