Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Cooling System

Reply
 
Thread Tools Display Modes
  #1   IP: 71.227.20.120
Old 08-05-2006, 06:26 PM
patsfan patsfan is offline
Member
 
Join Date: Aug 2006
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Impeller Woes

I have had a hard time finding the correct impeller for my atomic four. It is fresh water cooled without a heat exchanger. When I bought my 1970 CAL 29, I bought a spare impeller and gasket at my local Mike's Marine. When the impeller failed I realised that the impeller I had bought was too large (2" x 7/8" with a 1/2" D bore) The impeller that was in the pump was a JABSCO 4528-01 (1 5/8" x 3/4" with a 3/8 plain bore and a screw), so I bought one of those. While this seems the right size there is a pin permanantly affixed to the impeller. The one that came out seemed to have been modified by removing the pin and tapping it for the screw (#10-32)

Has anyone seen this before? What is the correct impeller? Does it come with a screw? Is modifying the impeller recommended?
Reply With Quote
  #2   IP: 38.118.52.41
Old 08-06-2006, 06:59 AM
Don Moyer's Avatar
Don Moyer Don Moyer is offline
 
Join Date: Oct 2004
Posts: 2,809
Thanks: 0
Thanked 149 Times in 96 Posts
I believe that Jabsco did commonly use a machine screw to hold the impeller on the shaft.

Don
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
New MMI Flexible Impeller Pump Don Moyer Cooling System 35 09-09-2019 11:48 AM
Changing the impeller Unregistered Cooling System 10 12-03-2009 02:43 PM
Keep New impeller as spare, or replace? jimjuliem Cooling System 2 10-26-2007 08:26 PM
Removing the impeller Unregistered Cooling System 1 11-08-2005 06:12 AM
Water pump impeller questions Mr. K Cooling System 1 11-16-2004 09:36 AM


All times are GMT -4. The time now is 07:32 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2021 Moyer Marine Inc.

All Rights Reserved