Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Drive Train / Propellers

Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   IP:
Old 01-19-2021, 04:22 PM
Truchero Truchero is offline
Senior Member
Join Date: Dec 2020
Posts: 11
Thanks: 1
Thanked 0 Times in 0 Posts
Prop size for Pearson Renegade 27?

What propeller size should I use with a Pearson Renegade 27 with the A4 engine? It's at a boatyard and I have never handled it under power. It came with a composite propeller installed, and also a 13x11 Michigan two blade brass prop in storage. The composite prop on the shaft is cracked. It has no numbers but it is significantly smaller than the brass one.

I initially planned to replace the broken one with the 13x11, but it seems like it would be too big for the low rpm engine. Any ideas? Can I get away with it? The boat has a 21' waterline and around 7k bare displacement.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Prop size. Shrek Drive Train / Propellers 67 12-13-2016 02:00 PM
what size prop to use whiskey wings Drive Train / Propellers 12 10-25-2015 12:54 PM
What size prop? smp Drive Train / Propellers 15 09-12-2012 08:35 AM
Proper size and pitch prop for 74 C&C33 MkI kwalters Drive Train / Propellers 6 10-16-2008 05:24 PM
Prop size Sailwood Drive Train / Propellers 8 05-06-2005 02:55 PM

All times are GMT -4. The time now is 08:12 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.

Universalģ is a registered trademark of Westerbeke Corporation

Copyright © 2004-2021 Moyer Marine Inc.

All Rights Reserved