Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Introductions

Reply
 
Thread Tools Display Modes
  #1   IP: 209.122.192.157
Old 02-10-2021, 05:06 PM
jtane jtane is offline
Member
 
Join Date: Feb 2021
Posts: 3
Thanks: 1
Thanked 1 Time in 1 Post
New member 1976 Pearson 30

Hello all, I was reminded by Tim Smith over on the Pearson forum that some of you may enjoy pics of the A4 I cleaned up in my Pearson 30 "Isotope" in 2019.

I would say she's run about 300 hours since then. On a few occasions for close to 24 hours straight. No issues except a cheapo electric fuel pump failure (my fault). What an awesome, simple, and reliable little motor. Cheers to Moyer Marine and everyone here for helping to keep it alive!

A few pics toward the end of this page when I got the side plate off for the first time:
https://jessetane.com/isotope/refit-summer-2019

Most of the motor specific stuff here:
https://jessetane.com/isotope/auxili...haul-fall-2019
Reply With Quote
The Following User Says Thank You to jtane For This Useful Post:
TimBSmith (02-11-2021)
  #2   IP: 69.116.139.83
Old 02-10-2021, 09:21 PM
CRUX CRUX is offline
Senior Member
 
Join Date: Nov 2019
Posts: 17
Thanks: 16
Thanked 3 Times in 3 Posts
The boat looks great. Some impressive refit work on the A4 and the boat itself.

You stopped at some great anchorages. Mattituck being my favorite. Its a nice 40 mile hop from me on the way out of the sound.
Reply With Quote
  #3   IP: 209.122.192.157
Old 02-10-2021, 11:11 PM
jtane jtane is offline
Member
 
Join Date: Feb 2021
Posts: 3
Thanks: 1
Thanked 1 Time in 1 Post
Thanks. Mattituck is definitely nice to have, not much else for a ways on the New York side... cute town with a decent hardware store too.
Reply With Quote
  #4   IP: 134.41.100.227
Old 02-11-2021, 09:19 AM
Mo's Avatar
Mo Mo is offline
Afourian MVP
 
Join Date: Jun 2007
Location: Halifax NS,
Posts: 4,328
Thanks: 164
Thanked 249 Times in 171 Posts
Nice Job.

You did a good job on the boat. Really impressed that you took the hull down and faired etc and then put inter-protect on it prior to painting. I did a similar refit on a C&C 30 in 2007 and rarely have had to touch it since. I also removed all deck fittings, cleats, winches, stanchions etc and sealed them all with 3m 4200. We are into 2021 and I haven't had a deck leak. Also did my bottom with 2 coats of epoxy paint, not inter protect, but 2 part epoxy paint. Mine bottom was no where as bad as yours. That was a heck of a job you had ahead of you there.

She looks great. I've thought of getting a bigger boat numerous times but my thing is I know what it takes to bring them up to my standards and don't want to do it again. Enjoy the boat, she will serve you well for years. When you see the "prettier boats" go by you know you are on something.
__________________
Mo

"Odyssey"
1976 C&C 30 MKI

The pessimist complains about the wind.
The optimist expects it to change.
The realist adjusts the sails.
...Sir William Arthur Ward.
Reply With Quote
  #5   IP: 209.6.133.136
Old 02-11-2021, 01:57 PM
TimBSmith TimBSmith is online now
Senior Member
 
Join Date: Aug 2020
Location: Brookline, MA USA
Posts: 60
Thanks: 884
Thanked 19 Times in 10 Posts
Great to see the Isotope Atomic 4 story here...

Thank you for sharing the photos/story here....what a project removing/replacing the head...Stay well.
__________________
Tim Smith
Oasis
Pearson 30
1974, Number 572
Boston, MA USA
Reply With Quote
The Following User Says Thank You to TimBSmith For This Useful Post:
jtane (02-11-2021)
  #6   IP: 209.122.192.157
Old 02-11-2021, 02:13 PM
jtane jtane is offline
Member
 
Join Date: Feb 2021
Posts: 3
Thanks: 1
Thanked 1 Time in 1 Post
Thanks. Yeah I really had no idea what I was in for when I bought the boat, and the bottom job got a little out of control. I will say that I am glad I decided to do the barrier coat - it was an epoxy primer as you describe, and when the growth got ahead of me down in Florida, I was able to aggressively scrape it underwater without doing too much damage.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Pearson 30 questions...any answers? rockhopper Pearson 60 09-17-2017 10:02 PM
Pearson 39 BadaBing Pearson 20 10-07-2015 10:02 PM
Member to Member Emails Discontinued Administrator Announcements 2 04-07-2013 01:45 PM
Calling all Pearson 35 owners... Administrator Pearson 10 10-24-2010 09:50 PM
New member rpn59 Introductions 0 07-21-2007 01:51 PM


All times are GMT -4. The time now is 02:55 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2021 Moyer Marine Inc.

All Rights Reserved