|
#1
IP: 174.65.19.8
01-05-2023, 09:02 PM
|
|||
|
|||
Altenator Fusing
I'm about to replace my 35 amp alternator with the 55. It will be wired from the alternator to the solenoid. Does this require fusing? If so, what size fuse would be suggested. I've heard 1.5 times the amperage, or in this case about an 80 amp fuse. Thoughts?
|
|
#2
IP: 138.207.177.95
01-05-2023, 09:48 PM
|
||||
|
||||
|
80 amps sounds about right. Make sure the wire is adequate as well, I would use 4 gauge myself.
__________________
Joe Della Barba Coquina C&C 35 MK I Maryland USA
|
| The Following User Says Thank You to joe_db For This Useful Post: | ||
GregH (01-06-2023) | ||
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
