Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Troubleshooting

Reply
 
Thread Tools Display Modes
  #26   IP: 47.142.131.233
Old 07-08-2021, 05:29 PM
JOHN COOKSON JOHN COOKSON is offline
Afourian MVP, Professor Emeritus
 
Join Date: Nov 2008
Posts: 3,500
Thanks: 54
Thanked 855 Times in 629 Posts
Is the choke adjusted correctly? When the engine starts to die does closing the choke help it to run longer?

ex TRUR GRIT
Reply With Quote
The Following User Says Thank You to JOHN COOKSON For This Useful Post:
Dave Neptune (07-08-2021)
  #27   IP: 104.174.83.118
Old 07-08-2021, 05:57 PM
ndutton's Avatar
ndutton ndutton is offline
Afourian MVP
 
Join Date: May 2009
Location: Torrance, CA
Posts: 9,619
Thanks: 198
Thanked 2,208 Times in 1,425 Posts
Quoting myself from 4 days ago:
Quote:
Originally Posted by ndutton View Post
when it quits and without restarting I'd like to know the fuel level in the carburetor bowl at the instant it quits.
__________________
Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others
Reply With Quote
  #28   IP: 35.143.211.72
Old 07-08-2021, 06:16 PM
Catfish Catfish is offline
Senior Member
 
Join Date: Jan 2020
Posts: 26
Thanks: 22
Thanked 3 Times in 2 Posts
John - I have the choke cable disconnected so it is completely open. I've visually verified as well.

ndutton - I've tried to do this but by the time I get the fuel shut off and the carb unbolted it's full. Don't know if it's from the time it takes me to do that, or if it's staying full. I've tried 2 different carbs, and today a straight gravity feed fuel system with a new fuel pump and hoses. Getting the same result.
Reply With Quote
  #29   IP: 172.58.76.239
Old 07-08-2021, 06:25 PM
roadnsky's Avatar
roadnsky roadnsky is offline
Afourian MVP
 
Join Date: Dec 2008
Location: Lake Mead, NV
Posts: 3,104
Thanks: 24
Thanked 467 Times in 309 Posts
Quote:
Originally Posted by Catfish View Post
...by the time I get the fuel shut off and the carb unbolted it's full.
Next time run it WITHOUT the Flame Arrestor on the carb.
That will allow you to look into the BOWL or Throat.
If you can't see clearly, stick your phone in there and take a bunch of shots.
We're looking to see if fuel is pooling in there.
(Neil, speak up if this isn't where you were going)
__________________
-Jerry

'Lone Ranger'

1978 RANGER 30
Reply With Quote
  #30   IP: 104.174.83.118
Old 07-08-2021, 06:32 PM
ndutton's Avatar
ndutton ndutton is offline
Afourian MVP
 
Join Date: May 2009
Location: Torrance, CA
Posts: 9,619
Thanks: 198
Thanked 2,208 Times in 1,425 Posts
Quote:
(Neil, speak up if this isn't where you were going)
No need. All I'm trying to do is garner as much pertinent information as possible rather than jumping to conclusions or guessing.
__________________
Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others
Reply With Quote
  #31   IP: 172.58.76.239
Old 07-08-2021, 06:37 PM
roadnsky's Avatar
roadnsky roadnsky is offline
Afourian MVP
 
Join Date: Dec 2008
Location: Lake Mead, NV
Posts: 3,104
Thanks: 24
Thanked 467 Times in 309 Posts
Thanks Neil.

Catfish-
Can you try a test with the Stuffing Box loosened up?
Loosen it so it's really dripping please.
__________________
-Jerry

'Lone Ranger'

1978 RANGER 30
Reply With Quote
  #32   IP: 35.143.211.72
Old 07-08-2021, 06:37 PM
Catfish Catfish is offline
Senior Member
 
Join Date: Jan 2020
Posts: 26
Thanks: 22
Thanked 3 Times in 2 Posts
I understand. This isn't my first A4. I like to think I'm a methodical troubleshooter, but this engine has me throwing parts at it, doing ritual dances, creating new swear words, and losing my religion. I'm tapping out for this evening. Going to hit it again in the morning.
Reply With Quote
  #33   IP: 172.58.76.239
Old 07-08-2021, 06:46 PM
roadnsky's Avatar
roadnsky roadnsky is offline
Afourian MVP
 
Join Date: Dec 2008
Location: Lake Mead, NV
Posts: 3,104
Thanks: 24
Thanked 467 Times in 309 Posts
Cat-
Please don't take us wrong...

Very easy to do with putting our thoughts down in writing on the interweb.
We don't want to insult and most certainly we're not inferring you aren't anything but very capable to solve this.
We ARE on your side.

Also, please don't get discouraged.
It'll probably be something very simple that we're missing.
You've got this!
__________________
-Jerry

'Lone Ranger'

1978 RANGER 30
Reply With Quote
  #34   IP: 47.142.131.233
Old 07-08-2021, 06:49 PM
JOHN COOKSON JOHN COOKSON is offline
Afourian MVP, Professor Emeritus
 
Join Date: Nov 2008
Posts: 3,500
Thanks: 54
Thanked 855 Times in 629 Posts
Quote:
Originally Posted by Catfish View Post
John - I have the choke cable disconnected so it is completely open. I've visually verified as well.
Did you look at the choke butterfly while the engine was running? With the cable disconnected the choke butterfly is free to be in any position while the engine is running the position determined by the vibration of the engine alignment of the planets so on.
If the choke is open and the cable is disconnected how did you start the engine?
What am I missing here?

ex TRUE GRIT
Reply With Quote
  #35   IP: 104.174.83.118
Old 07-08-2021, 07:16 PM
ndutton's Avatar
ndutton ndutton is offline
Afourian MVP
 
Join Date: May 2009
Location: Torrance, CA
Posts: 9,619
Thanks: 198
Thanked 2,208 Times in 1,425 Posts
How many turns is the idle air mixture screw off its seat? Does the engine stumble before dying or does it quit like flipping off a switch? To pile on John's question, are you starting it without the choke cable attached? I think I read that.
__________________
Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others

Last edited by ndutton; 07-08-2021 at 09:07 PM.
Reply With Quote
The Following User Says Thank You to ndutton For This Useful Post:
Catfish (07-09-2021)
  #36   IP: 162.219.70.239
Old 07-09-2021, 07:30 AM
Peter's Avatar
Peter Peter is offline
Afourian MVP
 
Join Date: Jul 2016
Location: Nova Scotia, Canada
Posts: 297
Thanks: 162
Thanked 140 Times in 101 Posts
One thing that has yet to be considered here is the exhaust - it it was partially blocked it might permit the engine to run ok when not under load. This has been mentioned on other threads on this forum.

It seems that the engine is getting fuel - reading the thread it seems that the entire fuel system has been bypassed - and spark as the engine seems to run fine when not under load. Shaft apparently turns freely and stuffing box is cool.

There is not much else other than exhaust is there?

On other threads it has been suggested to disconnect exhaust and run the engine that way to test. Perhaps others have better ideas on how to test as I am not sure I would like to run my engine that way

Peter
Reply With Quote
The Following User Says Thank You to Peter For This Useful Post:
Catfish (07-09-2021)
  #37   IP: 155.186.122.195
Old 07-09-2021, 10:38 AM
Dave Neptune Dave Neptune is offline
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
I have been reading this post and have delt with similar issues a few times. I have seen this mostly with the mechanical pump when very old. The pump was still good and gave 2.5 PSI at idle but under load when "good flow is required" the pump could not maintain enough pressure to move the gage and thus died. This is a classic fuel flow issue.
You seem to of covered this with the gravity feed and such but still no fuel pressure reading under load ~~ no flow no go. This is still a minor possibility. The gravity feed will idle but not make any real power due to the LACK OF FLOW AT PRESSURE. This also points to a flow at load issue.

Now to the exhaust. If the exhaust is plugging up it could be after a load is applied the internal lining of the hose collapses causing no power or very little. But this will not usually cause a stall. There are a few ways to check that are a bit messy but not bad to do if well prepared.

One concern is the sooty plugs, if they are sooty she is way rich which indicates to much fuel not a lack there of. AND exhaust back pressure can cause plug fouling too.

I like many others would like to see a pressure reading under load and at idle.

Did this issue just happen all of a sudden or did it just start getting worse over time? What did you set the float at and did you use a new gasket? The new gasket will insure that the emulsion well is sealed at the top a real problem in this carb. If the well is leaking air the carb will go very lean and not work under load.

Dave Neptune
Reply With Quote
The Following User Says Thank You to Dave Neptune For This Useful Post:
Catfish (07-09-2021)
  #38   IP: 35.143.211.72
Old 07-09-2021, 11:27 AM
Catfish Catfish is offline
Senior Member
 
Join Date: Jan 2020
Posts: 26
Thanks: 22
Thanked 3 Times in 2 Posts
Jerry - Thanks for the encouragement and I'm not insulted at all. I was just reassuring myself lol. I appreciate EVERYONE'S input thus far. Sorry if I'm skipping around a bit. I'm getting suggestions from everyone.

The choke cable is disconnected, but held open with a spring. The engine starts right up without applying choke.

I have a new fuel pump (verified it's pumping). With a gravity feed into the fuel pump OR directly into the carb the engine runs in gear tied to the dock and then after one to two minutes I can hear the rpms start to drop and it stumbles to a stall. Applying choke when I hear the rpms drop doesn't help it recover. If I quickly pop it into neutral it will sometimes stay running. But always immediately starts right back up. This issue is consistent with 2 separate carbs. I've got to go grab another big wrench to tackle the stuffing box. I repacked it last year and the shaft turns freely by hand with a about 2 drips per minute while running.

This problem started all of the sudden a few months ago. I limped the boat home and figured it was old fuel or gunk in the carb. Life happened and I've just recently got back to trying to fix it. Looking into the carb after running it appears dry, no pooling of fuel inside. To answer how much fuel is in the carb when it stalls, I shut off the fuel and opened the main jet plug after a stall and plenty of fuel came out. I've attached 2 pics.
Attached Images
  
Reply With Quote
  #39   IP: 35.143.211.72
Old 07-09-2021, 11:29 AM
Catfish Catfish is offline
Senior Member
 
Join Date: Jan 2020
Posts: 26
Thanks: 22
Thanked 3 Times in 2 Posts
Neil - The idle air mixture screw is out 1 and 1/4 turn. Seems to idle best there.
Reply With Quote
  #40   IP: 35.143.211.72
Old 07-09-2021, 11:59 AM
Catfish Catfish is offline
Senior Member
 
Join Date: Jan 2020
Posts: 26
Thanks: 22
Thanked 3 Times in 2 Posts
Firing order appears correct. Plugs seem pretty sooty to me (but dry). They were new last week and only used for troubleshooting, probably less than an hour of run time. I'm going to search the forum for collapsed exhaust hose test proceedures.
Attached Images
   
Reply With Quote
  #41   IP: 47.142.131.233
Old 07-09-2021, 12:02 PM
JOHN COOKSON JOHN COOKSON is offline
Afourian MVP, Professor Emeritus
 
Join Date: Nov 2008
Posts: 3,500
Thanks: 54
Thanked 855 Times in 629 Posts
Quote:
Originally Posted by Catfish View Post
The choke cable is disconnected, but held open with a spring. The engine starts right up without applying choke.
You are running way to rich. It should be impossible to start an A4 cold without the choke closed.
The plugs are excessively sooty for being almost new.


ex TRUE GRIT

Last edited by JOHN COOKSON; 07-09-2021 at 12:06 PM.
Reply With Quote
The Following User Says Thank You to JOHN COOKSON For This Useful Post:
Catfish (07-09-2021)
  #42   IP: 35.143.211.72
Old 07-09-2021, 12:11 PM
Catfish Catfish is offline
Senior Member
 
Join Date: Jan 2020
Posts: 26
Thanks: 22
Thanked 3 Times in 2 Posts
Aside from an adjustable main jet is there any way to rectify the too rich situation?
Reply With Quote
  #43   IP: 100.36.65.17
Old 07-09-2021, 12:33 PM
edwardc's Avatar
edwardc edwardc is offline
Afourian MVP
 
Join Date: Aug 2009
Location: Laurel, MD
Posts: 2,509
Thanks: 153
Thanked 595 Times in 388 Posts
Quote:
Originally Posted by JOHN COOKSON View Post
You are running way to rich. It should be impossible to start an A4 cold without the choke closed.
The plugs are excessively sooty for being almost new.


ex TRUE GRIT
John beat me to it. Indications are that you are running way too rich.

Since you've swapped out the carb, fuel tank and eliminated the pump, It's got to be something else that's in common to all test scenarios.

Just spitballing here, but in each test, did you use the same flame arrestor? I know mine can get rather gunky, and a clogged flame arrestor would be just like running with the choke on, resulting in a rich mixture and high fuel consumption.
__________________
@(^.^)@ Ed
1977 Pearson P-323 "Dolce Vita"
with rebuilt Atomic-4

Reply With Quote
The Following User Says Thank You to edwardc For This Useful Post:
Catfish (07-09-2021)
  #44   IP: 35.143.211.72
Old 07-09-2021, 12:41 PM
Catfish Catfish is offline
Senior Member
 
Join Date: Jan 2020
Posts: 26
Thanks: 22
Thanked 3 Times in 2 Posts
I have been running the same flame arrestor, so I'll check that now! But I did run for quite awhile without it on the carb and experienced the same thing.
Reply With Quote
  #45   IP: 155.186.122.195
Old 07-09-2021, 01:49 PM
Dave Neptune Dave Neptune is offline
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
Catfish, since you have stated that it started all of a sudden and switching carbs made no difference as well as new fuel. A sudden change is usually ignition related or something breaking. In this case I think it just may be an exhaust hose shot kraps.

If the inner wall came loose it would do so somewhat suddenly whereas the "exhaust plugging with deposits" is a gradual scenario and both can cause extreme loss of power but not usually stalling. It could be a combination of a carb issue, not a bad one as it runs and indicates rich being exacerbated by a collapsed hose creating the stall. How old is the exhaust hose?

Dave Neptune
Reply With Quote
The Following User Says Thank You to Dave Neptune For This Useful Post:
Catfish (07-09-2021)
  #46   IP: 35.143.211.72
Old 07-09-2021, 02:44 PM
Catfish Catfish is offline
Senior Member
 
Join Date: Jan 2020
Posts: 26
Thanks: 22
Thanked 3 Times in 2 Posts
holy moley

I believe I have solved the mystery. I started taking the exhaust apart beginning at the block. All seemed well with no scale or soot buildup, although the old exhaust hose definitely needs replacing. I looked into it and couldn't find any signs of collapse or obstruction. When I got to a check valve in the system I found an old corroded check valve with the flap pin completely disintegrated and the flap rattling around inside. I opened it up and removed the flapper, essentially making myself a coupling. ABRA KADABRA....engine is running fine against the dock lines for the last ten minutes at about 1/4 throttle. Could that restriction be causing back pressure and causing the sooty plugs??? Going for a test run in a few hours when it cools down.
Attached Images
   
Reply With Quote
The Following 2 Users Say Thank You to Catfish For This Useful Post:
scratchee (07-09-2021), Surcouf (07-10-2021)
  #47   IP: 155.186.122.195
Old 07-09-2021, 02:51 PM
Dave Neptune Dave Neptune is offline
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
Bingo for blocked exhaust!! Now that would be a blockage.

Take a look at the plugs after running, may be just fine.

Dave Neptune
Reply With Quote
The Following User Says Thank You to Dave Neptune For This Useful Post:
Catfish (07-10-2021)
  #48   IP: 172.58.76.239
Old 07-09-2021, 09:08 PM
roadnsky's Avatar
roadnsky roadnsky is offline
Afourian MVP
 
Join Date: Dec 2008
Location: Lake Mead, NV
Posts: 3,104
Thanks: 24
Thanked 467 Times in 309 Posts
Quote:
Originally Posted by Catfish View Post
I PULLED 2 AND 3, THINKING IF THE ENGINE RAN BETTER IT COULD BE EXHAUST BLOCKAGE.
Exhaust... Bingo!
So glad you've found this. (Feels good 'eh?)

I guess some of us wrote off the exhaust blockage too easily. (me)
Sorry. It seems so obvious now.

Cat-
This is one reason you got so many questions even tho you had (in theory) crossed off that issue on your checklist.
It is the hardest part of contributing on this forum...
Troubleshooting remotely without the benefit of the senses of seeing, smelling and touching.
AND... the keystone of this forum...
Being reluctant to offend or "flame" someone in expressing an opinion.

So... celebrate your troubleshooting and DYI skills! Congrats!
__________________
-Jerry

'Lone Ranger'

1978 RANGER 30
Reply With Quote
The Following 2 Users Say Thank You to roadnsky For This Useful Post:
Catfish (07-10-2021), W2ET (07-09-2021)
  #49   IP: 35.143.211.72
Old 07-10-2021, 08:00 AM
Catfish Catfish is offline
Senior Member
 
Join Date: Jan 2020
Posts: 26
Thanks: 22
Thanked 3 Times in 2 Posts
Thank you Jerry. It does feels great. I was at wits end and had started researching electric engine conversions lol. Thank you EVERYONE for your contributions to this thread. I've always been a cheerleader for the A4. I hope I can give back to this forum as much as I've taken. If any of you are ever in the gulf beaches area of St Petersburg Florida please accept my invite for coffee or a cocktail.
Reply With Quote
  #50   IP: 165.225.92.185
Old 07-10-2021, 04:38 PM
Surcouf's Avatar
Surcouf Surcouf is offline
Afourian MVP, Professor Emeritus
 
Join Date: May 2018
Posts: 361
Thanks: 328
Thanked 163 Times in 123 Posts
not the first time on this forum: air, fuel, spark.... and an open exhaust!
Well done!
__________________
Surcouf
A nostalgic PO - Previously "Almost There" - Catalina 27 (1979)
Reply With Quote
Reply

Tags
troubleshooting

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Engine starts, runs and then stalls after 5-10 minutes carriebates Troubleshooting 2 08-18-2020 12:53 AM
engine runs great, dies, restarts after 15 min, dies Bryan Howell Troubleshooting 41 11-09-2016 10:31 AM
Idles great, no power in midrange, then revs freely moir Troubleshooting 6 09-22-2011 07:34 PM
Idles great, no power in midrange, then revs freely moir Troubleshooting 12 09-20-2011 11:18 AM
Runs great, then shuts off, then runs great jacques debauche Ignition System 17 05-26-2011 10:10 AM


All times are GMT -4. The time now is 07:50 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved