#1
IP: 24.119.211.241
|
|||
|
|||
Prop size for Pearson Renegade 27?
What propeller size should I use with a Pearson Renegade 27 with the A4 engine? It's at a boatyard and I have never handled it under power. It came with a composite propeller installed, and also a 13x11 Michigan two blade brass prop in storage. The composite prop on the shaft is cracked. It has no numbers but it is significantly smaller than the brass one.
I initially planned to replace the broken one with the 13x11, but it seems like it would be too big for the low rpm engine. Any ideas? Can I get away with it? The boat has a 21' waterline and around 7k bare displacement. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Prop size. | Shrek | Drive Train / Propellers | 67 | 12-13-2016 02:00 PM |
what size prop to use | whiskey wings | Drive Train / Propellers | 12 | 10-25-2015 12:54 PM |
What size prop? | smp | Drive Train / Propellers | 15 | 09-12-2012 08:35 AM |
Proper size and pitch prop for 74 C&C33 MkI | kwalters | Drive Train / Propellers | 6 | 10-16-2008 05:24 PM |
Prop size | Sailwood | Drive Train / Propellers | 8 | 05-06-2005 02:55 PM |