#1
IP: 172.56.39.221
|
|||
|
|||
Water jacket questions
1. Am I correct that the area the water flows through is called the water jacket? I'm assuming that based on its cover being called the water jacket cover.
2. Now that I've got it open any advice on cleaning it? 3. Any advice on protecting it. High temp primer or something? 4. What's the bolt or screw in the lower left of the pic? Is it a drain for the water jacket? Thanks!
__________________
Kiki Ericson 35 - #282 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Winterizing A4 and General Boat Preparation | Mo | General Maintenance | 85 | 11-05-2021 06:26 AM |
No spark after water jacket repair. | theredboat | Troubleshooting | 1 | 07-05-2013 01:11 AM |
Stainless bolts for water jacket cover | gone2ddogs | Cooling System | 1 | 01-16-2008 06:02 AM |
Water Jacket Cleaning | Tom Alessi | Cooling System | 0 | 11-06-2006 12:16 PM |
Water pump impeller questions | Mr. K | Cooling System | 1 | 11-16-2004 09:36 AM |