Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Safety

Reply
 
Thread Tools Display Modes
  #1   IP: 209.128.21.10
Old 08-04-2014, 10:07 AM
cdhickey cdhickey is offline
Senior Member
 
Join Date: Sep 2013
Location: Newfoundland
Posts: 63
Thanks: 46
Thanked 5 Times in 5 Posts
Refuelling at sea

So I'm fairly confident with the safety precautions necessary when refuelling a gas powered boat at a fuel dock, but I am less sure of what the best practices are if one had to refuel at sea or on a mooring. To date this hasn't been an issue for me, but I can see scenarios when it may be necessary to use a jerry can to refill the tank between ports.

My thoughts would be that the process would be much the same- no sources of ignition, hatches closed, etc. What other precautions should be taken? Or is this just a terrible idea to even consider?
__________________
Chris
S/V Seeker
1972 C&C 30
Terra Nova Yacht Club, Holyrood NL
Reply With Quote
  #2   IP: 24.152.131.153
Old 08-04-2014, 10:11 AM
ndutton's Avatar
ndutton ndutton is offline
Afourian MVP
 
Join Date: May 2009
Location: Torrance, CA
Posts: 9,619
Thanks: 198
Thanked 2,208 Times in 1,425 Posts
Heh-heh, jerry cans are the ONLY way I fuel up. The precautions are the same as at the fuel dock.
__________________
Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others
Reply With Quote
  #3   IP: 216.222.80.83
Old 08-04-2014, 10:35 AM
roadnsky's Avatar
roadnsky roadnsky is offline
Afourian MVP
 
Join Date: Dec 2008
Location: Lake Mead, NV
Posts: 3,104
Thanks: 24
Thanked 467 Times in 309 Posts
Quote:
Originally Posted by ndutton View Post
Heh-heh, jerry cans are the ONLY way I fuel up. The precautions are the same as at the fuel dock.
+1
In fact, I would wholeheartedly argue that it is a much safer procedure.
__________________
-Jerry

'Lone Ranger'

1978 RANGER 30
Reply With Quote
  #4   IP: 97.67.11.26
Old 08-04-2014, 12:17 PM
Trés 30's Avatar
Trés 30 Trés 30 is offline
Senior Member
 
Join Date: May 2014
Posts: 109
Thanks: 0
Thanked 7 Times in 7 Posts
Lightbulb

If spillage is your concern (I also use the red cans) you could use a transfer pump like the one pictured.

Maybe also you could rig a reserve tank with a Y valve and a line directly to a removable, but secured, tank. Be sure to vent it properly. All safety rules (ventilation, no spark) apply x2.
Attached Images
 
Reply With Quote
  #5   IP: 24.224.155.146
Old 08-04-2014, 12:26 PM
Mo's Avatar
Mo Mo is offline
Afourian MVP
 
Join Date: Jun 2007
Location: Halifax NS,
Posts: 4,470
Thanks: 292
Thanked 411 Times in 272 Posts
Quote:
Originally Posted by ndutton View Post
Heh-heh, jerry cans are the ONLY way I fuel up. The precautions are the same as at the fuel dock.
+ another 1
__________________
Mo

"Odyssey"
1976 C&C 30 MKI

The pessimist complains about the wind.
The optimist expects it to change.
The realist adjusts the sails.
...Sir William Arthur Ward.
Reply With Quote
  #6   IP: 199.173.224.30
Old 08-04-2014, 12:33 PM
joe_db's Avatar
joe_db joe_db is online now
Afourian MVP
 
Join Date: May 2009
Posts: 4,474
Thanks: 49
Thanked 1,026 Times in 721 Posts
Refueling at sea implies to me that you are underway. This introduces a few complications.
1. Water in the fuel: If it is rough enough you'll get a lot of saltwater along with your fuel. With ethanol-crapgas this will make a mess not fixable by the water seperator.
2. Spillage: If it is rough, gas will go other places besides the tank.
3. Wind Direction: Typically the fuel fill is near the stern. Wind from aft will blow gas fumes into the cabin In this case a course change is best or at least shut the hatches.
4. Engine running: If all is well the engine can be running, but you have no margin at all for finding leaks or fumes before they are a real danger.

Refueling while anchored is a best case. You are into the wind and not underway.
Reply With Quote
  #7   IP: 72.71.243.112
Old 08-04-2014, 12:34 PM
ArtJ ArtJ is offline
 
Join Date: Sep 2009
Posts: 2,177
Thanks: 221
Thanked 65 Times in 50 Posts
My fill cap is located amidships on the port deck. I usually just take
a funnel and a new fangled home depot jug , take the crazy spout off and pour
into the funnel. I have done this at anchor successfully, no engine
running and at sea with wind and engine running. It seems as though
the breeze keeps fumes away. no open hatches or ports.
Would never do this at a fill dock.
Reply With Quote
  #8   IP: 107.0.6.242
Old 08-04-2014, 01:01 PM
hanleyclifford's Avatar
hanleyclifford hanleyclifford is offline
Afourian MVP
 
Join Date: Mar 2010
Posts: 6,978
Thanks: 172
Thanked 280 Times in 226 Posts
Talking

When traveling the ICW to Florida I have no choice but to visit fuel docks though with my three tank (total 46 gal) capacity I can pick and choose. I used to carry fuel jugs on deck (port and starboard) but when you do that you look like exactly what you are - a "floater". But I do like to have the ability to buy gasoline from a land fuel station (South Mills Lock is a good example) so I devised a removable 6 gal tank complete with quick disconnects for fuel and vent and an independent shut off valve. I never refuel underway; you never know when a stink pot will roar by and lay a wake on you.

Last edited by hanleyclifford; 07-13-2016 at 08:29 PM.
Reply With Quote
  #9   IP: 72.237.58.121
Old 08-04-2014, 06:11 PM
Vermont30's Avatar
Vermont30 Vermont30 is offline
Senior Member
 
Join Date: Jun 2013
Posts: 107
Thanks: 0
Thanked 0 Times in 0 Posts
This happened yesterday where I get my pump outs....

http://www.burlingtonfreepress.com/s...odes/13551445/
Reply With Quote
  #10   IP: 206.125.176.3
Old 08-05-2014, 03:30 PM
sastanley's Avatar
sastanley sastanley is offline
Afourian MVP
 
Join Date: Sep 2008
Location: Solomons, MD
Posts: 7,016
Thanks: 1,134
Thanked 600 Times in 442 Posts
Help for new fangled spouts

I found a small company in Hawaii (on ebay) that sells little vents for jerry cans. This helps the s-l-o-w spouts that 'vent themselves' tremendously and you get much better flow. Most of my jerry cans have these now, and each time I empty one, I add a vent cap. I still have a couple old school jerry cans without the stupid spouts too.

Here is a link to his store - http://stores.ebay.com/Gas-Spouts-Pl...p2047675.l2563
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
http://www.moyermarine.com/forums/signaturepics/sigpic3231_6.gif
Reply With Quote
  #11   IP: 47.23.15.124
Old 08-05-2014, 03:48 PM
Sea Haven's Avatar
Sea Haven Sea Haven is offline
Senior Member
 
Join Date: Jun 2013
Posts: 33
Thanks: 0
Thanked 1 Time in 1 Post
Talking Best filling "tool" ever!

Been on the hook for quite some time.
A couple of 5 Gal cans and a Hopkins hose:
Hopkins (HPK10801)
Shaker Siphon

No worries regarding the new "push to pour" spouts on the newer cans since you remove it altogether and siphon directly from the can to your gas fill.
After following ALL the same recommended fueling procedures that you would at the dock: (Close Ports/Hatches etc)
1-Place the fill end in your fill opening.
2-The end with the metal and marble into the gas can.
3-Shake it up and down a few times quickly to get it started.
4-Sit back and watch it empty the Gas can in no time.
5-Pull the can end out to let whatever's in the hose finish into your tank.
6-Let the Hopkins air dry before storing it.
After completion, again follow ALL the same recommended fueling procedures that you would at the dock: (Open Ports/Hatches, run blower etc)
I have NEVER spilled a drop on my Pearson 323.
Of course check local Law Authority regarding the legality of fueling at your mooring. All you need is a pissed off mooring neighbor calling "Five-O" down on you.
I absolutely love the Hopkins, and you're not constrained to any particular gas can or fill spout. It's amazing how easy and fast it works.
"Sub" Ed
Reply With Quote
  #12   IP: 216.115.121.240
Old 08-05-2014, 09:33 PM
lat 64's Avatar
lat 64 lat 64 is offline
Afourian MVP
 
Join Date: Oct 2008
Location: Fairbanks, Alaska
Posts: 1,964
Thanks: 39
Thanked 240 Times in 157 Posts
Question:
Why do you guys close hatches and ports during fuel up?
__________________
Whiskeyjack a '68 Columbia 36 rebuilt A-4 with 2:1

"Since when is napping doing nothing?"
Reply With Quote
  #13   IP: 72.45.14.161
Old 08-05-2014, 09:42 PM
joe_db's Avatar
joe_db joe_db is online now
Afourian MVP
 
Join Date: May 2009
Posts: 4,474
Thanks: 49
Thanked 1,026 Times in 721 Posts
To keep gas fumes out of the boat

Quote:
Originally Posted by lat 64 View Post
Question:
Why do you guys close hatches and ports during fuel up?
Reply With Quote
  #14   IP: 174.58.82.173
Old 08-05-2014, 11:29 PM
romantic comedy's Avatar
romantic comedy romantic comedy is offline
Afourian MVP
 
Join Date: May 2007
Location: florida
Posts: 1,912
Thanks: 13
Thanked 118 Times in 100 Posts
Russ, the gas fumes are heavier then air. Picture the fumes rolling across the boat down hill. The idea is to keep them from finding their way below.

After fill up, before starting the engine, open the hatches and ventilate.
Reply With Quote
  #15   IP: 216.115.121.240
Old 08-06-2014, 12:45 AM
lat 64's Avatar
lat 64 lat 64 is offline
Afourian MVP
 
Join Date: Oct 2008
Location: Fairbanks, Alaska
Posts: 1,964
Thanks: 39
Thanked 240 Times in 157 Posts
Thumbs up

Thanks, it all makes sense but I guess never did that because my fill port is outside of deep coamings and anything liquid or heavier than air would go overboard. That said, I make a more-than-usuall and rigorous sniff around the bilge before starting up at the gas dock. The attendants never give anyone grief about going through a check list. I have seen them watch me and smile.

I'll review my procedure. It might change.

Russ
__________________
Whiskeyjack a '68 Columbia 36 rebuilt A-4 with 2:1

"Since when is napping doing nothing?"

Last edited by lat 64; 08-06-2014 at 12:48 AM.
Reply With Quote
  #16   IP: 98.124.126.219
Old 08-06-2014, 04:32 AM
Rbyham Rbyham is offline
Senior Member
 
Join Date: Jan 2013
Posts: 172
Thanks: 0
Thanked 0 Times in 0 Posts
+1 on the shaker syphon hose. Cheap and simple and easy. Since getting one I never even contemplate pouring or spilling. A must have IMHO.
Reply With Quote
  #17   IP: 128.177.81.23
Old 08-06-2014, 06:18 AM
Administrator's Avatar
Administrator Administrator is offline
MMI Webmaster
 
Join Date: Oct 2004
Location: Chestertown, MD (Langford Creek)
Posts: 2,198
Thanks: 1,335
Thanked 365 Times in 182 Posts
+2 on the shaker siphon, plus the hose is clear, so you can see what you're removing when you use it to go looking for that ethanol schmutz at the bottom of the tank.

Bill
Reply With Quote
  #18   IP: 47.55.79.87
Old 08-06-2014, 07:34 AM
cdhickey cdhickey is offline
Senior Member
 
Join Date: Sep 2013
Location: Newfoundland
Posts: 63
Thanks: 46
Thanked 5 Times in 5 Posts
Thanks- all very helpful!
__________________
Chris
S/V Seeker
1972 C&C 30
Terra Nova Yacht Club, Holyrood NL
Reply With Quote
  #19   IP: 47.23.15.124
Old 08-06-2014, 08:45 AM
Sea Haven's Avatar
Sea Haven Sea Haven is offline
Senior Member
 
Join Date: Jun 2013
Posts: 33
Thanks: 0
Thanked 1 Time in 1 Post
Hopkins HPK10801

MMI~

Perhaps you folk's be adding the Hopkins to your excellent line?? lol

"Sub" Ed
SY Sea Haven
'78 Pearson 323 #124
Reply With Quote
  #20   IP: 206.125.176.3
Old 08-06-2014, 02:32 PM
sastanley's Avatar
sastanley sastanley is offline
Afourian MVP
 
Join Date: Sep 2008
Location: Solomons, MD
Posts: 7,016
Thanks: 1,134
Thanked 600 Times in 442 Posts
Quote:
Originally Posted by lat 64 View Post
Thanks, it all makes sense but I guess never did that because my fill port is outside of deep coamings and anything liquid or heavier than air would go overboard. That said, I make a more-than-usuall and rigorous sniff around the bilge before starting up at the gas dock. The attendants never give anyone grief about going through a check list. I have seen them watch me and smile.

I'll review my procedure. It might change.

Russ
Russ, My fuel fill is outboard of the cockpit coaming, and I am 99% sure the fumes go overboard as well, it is that 1% you never know about, so, I always close the boat as well, as I was taught. I also turn on the blower prior to opening up the boat.

If I am fueling at the slip with jerry cans...I usually have the jerry can as the first thing out of the trunk, and do the gas filling first before I open up the boat and bring any gear aboard, just out of habit, since the boat is already closed up.

When I ran a gas dock, I always worried about the ones that did NOT go thru a checklist or procedure. "Here's your receipt, sorry I can't help you off, I gotta get my tail up this dock and away from you in case you blow up!!"

edit - Ooooo, I like that shaker siphon.. I guess the marble thingie keeps the fuel in the line as you are advancing it to start the siphon??

I found another product I think I will be purchasing...a "Mr. Funnel"
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
http://www.moyermarine.com/forums/signaturepics/sigpic3231_6.gif

Last edited by sastanley; 08-06-2014 at 03:48 PM.
Reply With Quote
  #21   IP: 174.58.82.173
Old 08-06-2014, 02:59 PM
romantic comedy's Avatar
romantic comedy romantic comedy is offline
Afourian MVP
 
Join Date: May 2007
Location: florida
Posts: 1,912
Thanks: 13
Thanked 118 Times in 100 Posts
Russ, I fill up the way you do. Not that it is the best way...
I close the ports on the gas fill side, and that is it.
Reply With Quote
  #22   IP: 47.23.15.124
Old 08-06-2014, 04:52 PM
Sea Haven's Avatar
Sea Haven Sea Haven is offline
Senior Member
 
Join Date: Jun 2013
Posts: 33
Thanks: 0
Thanked 1 Time in 1 Post
Fuel Fill location

FWIW...
The fill on my Pearson 323 is on the stbd F/G "weatherboard" coaming, outboard side. The fumes that are displaced by the gas filling go directly overboard, as well as out the vent on the transom.
I stick as much hose a possible into Sea Haven's fuel fill while still maintaining enough length to remain in the gas can to allow can to rest on the coaming's flat top, inboard of the lifelines of course.
I do keep my hand the can as the little glass "marble" from the shaker siphon rattles away down at the bottom of the can as the boat fuels. It's a nice "audible" confirmation of fuel flow.
Direct addition of fuel with little chance of spill. IMHO, I would only use "Mr. Funnel" to fill the Gas Can at the station. Of course as mentioned before, I follow all practices, including flying the "BRAVO" flag.

On a side note, my Bristol 29.9, a diesel Yanmar 2GM15, had it's fuel fil in the center of the cockpit...WORSE PLACE EVER. If leaves clogged the cockpit drains, water seeped into the tank! And though I could enjoy a good cigar while fueling, no matter how careful I was diesel always managed to get on the cockpit deck and stain it.

I just love my 323, and the A4.

Last edited by Sea Haven; 08-06-2014 at 04:54 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:38 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved