Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Introductions

Reply
 
Thread Tools Display Modes
  #1   IP: 72.143.208.73
Old 03-28-2022, 06:30 PM
Fred1diver's Avatar
Fred1diver Fred1diver is offline
Senior Member
 
Join Date: Mar 2022
Posts: 37
Thanks: 9
Thanked 4 Times in 4 Posts
New here, just got an a4

Hello everyone, I’m Fred and I just acquired a 1972 Pearson 30 with the original atomic 4, it’s my first boat with an inboard, so that leaves me with a lot of questions, I need to do some work before the insurance company will accept me.

If anyone else has a P30 let me know, as I need some info for the gas tank, I need to add a ground wire and an anti-siphon valve, I’m not sure where the outlet hose connects to the tank, is it on top or bottom of the tank???
Not a lot of room to work there lol
Reply With Quote
  #2   IP: 162.245.50.230
Old 03-28-2022, 08:27 PM
Dave Neptune Dave Neptune is offline
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
Welcome. The tank would be no different for a Palmer or an A-4. Most all tank connections are from the top only fastening flanges any where else. The Palmer is an excellent engine as is the A-4, both are simple and function basically the same.

Dave Neptune
Reply With Quote
  #3   IP: 24.114.110.200
Old 03-29-2022, 09:10 AM
Fred1diver's Avatar
Fred1diver Fred1diver is offline
Senior Member
 
Join Date: Mar 2022
Posts: 37
Thanks: 9
Thanked 4 Times in 4 Posts
Hey Dave, I’m not sure if I follow, what is this about a palmer?
Reply With Quote
  #4   IP: 104.174.83.118
Old 03-29-2022, 09:26 AM
ndutton's Avatar
ndutton ndutton is offline
Afourian MVP
 
Join Date: May 2009
Location: Torrance, CA
Posts: 9,619
Thanks: 198
Thanked 2,208 Times in 1,425 Posts
Referring to your boat as a P30 invites confusion with the small Palmer sailboat engine, also a P30 which is coincidentally very similar to the Atomic 4. Thank goodness your Pearson doesn't have a Palmer engine, a P30 in your P30.
__________________
Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others
Reply With Quote
The Following User Says Thank You to ndutton For This Useful Post:
southcoasting (04-19-2022)
  #5   IP: 162.245.50.230
Old 03-29-2022, 10:41 AM
Dave Neptune Dave Neptune is offline
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
Fred, sorry for the confusion. I thought you were stating you bought a person with an A-4 and were asking about a Palmer in another boat with a tank issue.

The Palmer is a similar 4 cylinder flathead that was also popular. They stopped production just as Universal did however the Palmer does not have a "MMI" to support cast parts. Many are still running as they had good care. The Palmer is just hard to find parts for now!

Dave Neptune
Reply With Quote
  #6   IP: 32.211.38.220
Old 03-29-2022, 11:56 AM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 2,002
Thanks: 16
Thanked 578 Times in 405 Posts
Welcome to the group! We're here to help.
USCG requires that the outlet of the gas tank be on the top. Inside the tank, there's a pickup tube that goes within an inch or so of the bottom. A bottom connection could leak gas, while a top connection will just leak air. USCG is big on safety so follow their guidance.
Boats of that vintage may have had a copper tube for the fuel line. Most of them have been changed over to rubber hose, fuel rated of course.
Did a licensed surveyor do your punch list? If so, I recommend that you follow it.
Reply With Quote
  #7   IP: 65.79.140.188
Old 03-29-2022, 12:29 PM
Antibes's Avatar
Antibes Antibes is offline
Senior Member
 
Join Date: Jun 2011
Location: Chicago, IL
Posts: 120
Thanks: 8
Thanked 26 Times in 22 Posts
The anti siphon valve is usually placed in the fuel line after it leaves the tank. Attached is an example of the part you need. You will need to make sure on hose size
https://www.westmarine.com/buy/west-...waAnCMEALw_wcB

Pictures would help for how to ground your tank.
Reply With Quote
The Following User Says Thank You to Antibes For This Useful Post:
JackConnick (04-29-2022)
  #8   IP: 24.202.236.16
Old 03-29-2022, 02:56 PM
Fred1diver's Avatar
Fred1diver Fred1diver is offline
Senior Member
 
Join Date: Mar 2022
Posts: 37
Thanks: 9
Thanked 4 Times in 4 Posts
Thanks everybody for all the info, I already bought the part, I will need to go back to the boat to inspect the gas tank for the ground.
Yes the survey was done by a pro, I do intend to cover all the bases.

Can’t wait to splash her
Reply With Quote
  #9   IP: 32.211.38.220
Old 03-29-2022, 05:15 PM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 2,002
Thanks: 16
Thanked 578 Times in 405 Posts
I had a Tartan 30 and raced against Pearson 30s. The P30s that gave me fits had two things: First was a mainsail with two full length battens. This gave them a bit more roach up top. I eventually changed to a similar mainsail.
Second was a different rudder - a balanced vertical spade. The local owners were getting them from Evelyn Yachts. Other current manufacturers may have rudders to consider.
Of course if you're not racing...
Reply With Quote
  #10   IP: 209.6.152.28
Old 03-29-2022, 09:57 PM
TimBSmith TimBSmith is offline
Afourian MVP
 
Join Date: Aug 2020
Location: Brookline, MA USA
Posts: 162
Thanks: 2,239
Thanked 80 Times in 42 Posts
Welcome. 1974 Pearson 30 owner here.

I have owned "Oasis" hull number 572 for 2 years now, first season on the water last year. You are in the right place for growing your A4 expertise. Really one of the most helpful communities I have been part of on or off the net. That goes for our host as well. I cannot over emphasize the value of using the search function and saving your searches, rating a thread.

I recently did a complete salvage and breakdown of a 1976 Pearson 30 "Merry Rascal". Here are a couple of albums if you are interested.

Cutdown and Salvage
https://photos.app.goo.gl/iXuYKihBLMoJ2GsR9

Remaining Small Bits Available
https://photos.app.goo.gl/Xzs41qCzFT3sDeHb6

Some of the Big Bits Available
https://photos.app.goo.gl/ZMVsXm3c4bZ4rik66

Regarding your gas tank.
Oasis had been on stands for 3 years when I found her. She had no useful engine documentation at time of purchase. Amazingly, I found the prior, prior, prior owner's posts on this forum and was able to make a complete inventory of his improvements and the engines history. He posted under SMosher.

One of my first projects was end-to-end fuel system evaluation. This crew drilled into my thick skull: systematic evaluation of any system on the engine. For start-up: compression, spark, and fuel. My late model had a fuel system problem. I evaluated the tank. Affirmed safety, reliability, and quality of fuel delivery. Ultimately rebuilt the carb, found and solved the culprit for poor fuel flow to engine.

Fortunatly SMosher had replumbed the fuel lines and installed electronic pump and pressure guage. I began to pick up that many of the improvements I can make to my engine have diagnostic value. One evaluation I will urge upon you, unwrap your exhaust riser and inspect the mixing elbow and the riser assembly from manifold flange to water lift muffler, so often crumbling at elbow and neglected. Easily missed by surveyor.

I will post further at another time. Please let me know how I can be supportive of your P30 journey. I also encourage you to join the Pearson facebook and google (pearson-boats@googlegroups.com) groups. Again, welcome and fair winds.
__________________
Tim Smith
Oasis
Pearson 30
1974, Number 572
Boston, MA USA
Reply With Quote
  #11   IP: 24.202.236.16
Old 03-30-2022, 04:08 PM
Fred1diver's Avatar
Fred1diver Fred1diver is offline
Senior Member
 
Join Date: Mar 2022
Posts: 37
Thanks: 9
Thanked 4 Times in 4 Posts
Hey Tim, do you still have those parts for sale?
The self tailing winches interest me, depending on the price.
Do you have the handrails, both inside and outside?
Reply With Quote
The Following User Says Thank You to Fred1diver For This Useful Post:
TimBSmith (03-30-2022)
  #12   IP: 209.6.152.28
Old 03-30-2022, 07:31 PM
TimBSmith TimBSmith is offline
Afourian MVP
 
Join Date: Aug 2020
Location: Brookline, MA USA
Posts: 162
Thanks: 2,239
Thanked 80 Times in 42 Posts
Hi Fred. I will take further discussion of parts offline.

Winches and rails gone. For further info. Please feel free to email me at timbsmith1@yahoo.com for information on parts available. Thank you.
__________________
Tim Smith
Oasis
Pearson 30
1974, Number 572
Boston, MA USA
Reply With Quote
  #13   IP: 24.202.236.16
Old 04-01-2022, 06:38 PM
Fred1diver's Avatar
Fred1diver Fred1diver is offline
Senior Member
 
Join Date: Mar 2022
Posts: 37
Thanks: 9
Thanked 4 Times in 4 Posts
Hello again everyone, getting ready for summer, I will need to do an oil change, what oil filter do I need?
I would like to change the impeller to ensure a good season, how do I know what impeller I need?

What else do I need to know before I get her in the water?
Reply With Quote
  #14   IP: 162.245.50.230
Old 04-01-2022, 07:16 PM
Dave Neptune Dave Neptune is offline
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
There is no "stock" oil filter on the A-4, only ones as an add on and the existing filter should have a number on it. The impeller also depends on the pump you have. A pic of the pump should do and there should be a name and model # on the pump.

Dave Neptune
Reply With Quote
The Following User Says Thank You to Dave Neptune For This Useful Post:
Sam (04-02-2022)
  #15   IP: 209.6.152.28
Old 04-02-2022, 10:15 AM
TimBSmith TimBSmith is offline
Afourian MVP
 
Join Date: Aug 2020
Location: Brookline, MA USA
Posts: 162
Thanks: 2,239
Thanked 80 Times in 42 Posts
No one has said it yet(or I missed it) buy this manual from Moyer...

https://moyermarine.com/product/serv...erhaul-manual/

I replaced the impeller using Moyer product. Use the service manual or careful instructions here, because pulling it and replacing it may put other components at risk if you are not careful. A great time to look for scaling where the pump mounts and evaluate any signs of leaks around pump.

I run the engine for at least 15 minutes then use a "Topsider Oil Changer — Model# 5060TS" to suction the warm oil out. I found this method by searching this site. You will see that our engine likes clean fuel and fresh oil. I learned that the oil does a lot of work beyond engine lubrication, it also lubricates our direct drive transmission.

Search the archives here. There is a ton of information and checklists for Spring Launch. Also for oil grades. I am changing oil this season based on prior research. It seems like the Rotella 15W40 was good for my engine in the past, so now that I discovered this info I am going to test it out this spring.

Best developing your spring checklist.
__________________
Tim Smith
Oasis
Pearson 30
1974, Number 572
Boston, MA USA
Reply With Quote
The Following User Says Thank You to TimBSmith For This Useful Post:
Sam (04-02-2022)
  #16   IP: 24.15.213.195
Old 04-02-2022, 12:32 PM
Sam Sam is offline
Afourian MVP
 
Join Date: Apr 2010
Posts: 322
Thanks: 490
Thanked 140 Times in 109 Posts
You have received good advice especially regarding getting the Moyer Manual - best $50 you will ever spend. Also recommend an afternoon with the Moyer You tube video's. More importantly a review of past posts highlights various techniques that people have developed over the years regarding changing impellors, oil, distributor/carb maintenace, timing, fuel delivery problem solving etc etc that facilitate ease of work in cramped engine spaces resulting in dependable operations. The techniques/methods/frequency can still be very valid while not being boat model specific. Good luck
Reply With Quote
The Following User Says Thank You to Sam For This Useful Post:
TimBSmith (04-02-2022)
  #17   IP: 104.174.83.118
Old 04-02-2022, 01:36 PM
ndutton's Avatar
ndutton ndutton is offline
Afourian MVP
 
Join Date: May 2009
Location: Torrance, CA
Posts: 9,619
Thanks: 198
Thanked 2,208 Times in 1,425 Posts
If your access to the water pump is limited (most are), I recommend the Moyer Marine impeller puller. With a little practice it's one hand operation and will pay for itself the first time you use it.

https://moyermarine.com/product/impeller_puller/
__________________
Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others
Reply With Quote
The Following User Says Thank You to ndutton For This Useful Post:
TimBSmith (04-02-2022)
  #18   IP: 24.202.236.16
Old 04-04-2022, 06:53 PM
Fred1diver's Avatar
Fred1diver Fred1diver is offline
Senior Member
 
Join Date: Mar 2022
Posts: 37
Thanks: 9
Thanked 4 Times in 4 Posts
I will take pics of the pump tomorrow.
What type of oil do I need for the oil change?
Reply With Quote
  #19   IP: 24.202.236.16
Old 04-04-2022, 07:02 PM
Fred1diver's Avatar
Fred1diver Fred1diver is offline
Senior Member
 
Join Date: Mar 2022
Posts: 37
Thanks: 9
Thanked 4 Times in 4 Posts
I will post some pictures tomorrow of an unknown hose, it might be to facilitate an oil change, not sure yet.
Reply With Quote
  #20   IP: 65.79.140.188
Old 04-04-2022, 09:14 PM
Antibes's Avatar
Antibes Antibes is offline
Senior Member
 
Join Date: Jun 2011
Location: Chicago, IL
Posts: 120
Thanks: 8
Thanked 26 Times in 22 Posts
There are two recommendations for oil. Rotella Diesel 15w40 and original 30w

https://www.moyermarineforum.com/for...ead.php?t=6443
Reply With Quote
The Following User Says Thank You to Antibes For This Useful Post:
TimBSmith (04-04-2022)
  #21   IP: 24.202.236.16
Old 04-05-2022, 06:55 PM
Fred1diver's Avatar
Fred1diver Fred1diver is offline
Senior Member
 
Join Date: Mar 2022
Posts: 37
Thanks: 9
Thanked 4 Times in 4 Posts
So the water pump is an Oberdorfer, it says so on the cover.

I have a feeling that the hose I’m wondering about is for an oil change

It is connected between the carburetor and the fuel pump and goes to the front of the motor and is plugged at the end
Attached Images
  
Reply With Quote
  #22   IP: 209.6.152.28
Old 04-05-2022, 07:22 PM
TimBSmith TimBSmith is offline
Afourian MVP
 
Join Date: Aug 2020
Location: Brookline, MA USA
Posts: 162
Thanks: 2,239
Thanked 80 Times in 42 Posts
I marked up your picture after flipping it....

Only one item baffles me. I don't have this on my engine.

I cannot see the tube you have in question.

I have an oil fill cap on the back of the engine and the dipstick tube on the front of the engine. Those are the only methods I have of draining or filling the oil.

I pump warm oil out (with device in prior post), measure what I have sucked up, then add new oil.

Please take picture(s) that show the top and both sides of of your engine.

Keep at it....
Attached Images
 
__________________
Tim Smith
Oasis
Pearson 30
1974, Number 572
Boston, MA USA
Reply With Quote
  #23   IP: 24.202.236.16
Old 04-05-2022, 07:34 PM
Fred1diver's Avatar
Fred1diver Fred1diver is offline
Senior Member
 
Join Date: Mar 2022
Posts: 37
Thanks: 9
Thanked 4 Times in 4 Posts
How much oil do I need?
Reply With Quote
  #24   IP: 24.202.236.16
Old 04-05-2022, 07:45 PM
Fred1diver's Avatar
Fred1diver Fred1diver is offline
Senior Member
 
Join Date: Mar 2022
Posts: 37
Thanks: 9
Thanked 4 Times in 4 Posts
Hey Tim, the black hose is connected to the drain plug for the oil, the black part on the left is the carburetor and throttle line, on the right is the fuel bowl before the fuel pump, the white hose is the bilge pump hose
Reply With Quote
  #25   IP: 24.202.236.16
Old 04-13-2022, 04:14 PM
Fred1diver's Avatar
Fred1diver Fred1diver is offline
Senior Member
 
Join Date: Mar 2022
Posts: 37
Thanks: 9
Thanked 4 Times in 4 Posts
Ok, so I am looking for the shell rotella 15-40, but it’s sold out everywhere near me, keep in mind that I’m in Canada. And asking them for 30 weight all they offer is 10 w 30, I need help
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:09 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved