Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Cooling System

Reply
 
Thread Tools Display Modes
  #1   IP: 23.115.191.11
Old 07-19-2022, 03:16 PM
Golfdad75 Golfdad75 is offline
Senior Member
 
Join Date: Sep 2014
Posts: 93
Thanks: 8
Thanked 13 Times in 9 Posts
Replacing raw water impeller

I am wondering if it would be worth it to fill my inlet side hose with water before attaching. That woul give me less time spinning a dry impeller. My last one lasted about 1 year. I did not lube it and it was shredded.
Reply With Quote
The Following User Says Thank You to Golfdad75 For This Useful Post:
TimBSmith (07-19-2022)
  #2   IP: 162.245.50.196
Old 07-19-2022, 03:28 PM
Dave Neptune Dave Neptune is online now
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 4,701
Thanks: 615
Thanked 941 Times in 631 Posts
Adding the water won't hurt anything and may help depending on location to the waterline of the boat. Also a bit of Vaseline, grease or water pump lube on the impeller itself. Saves any rubbing until primed saving the impeller from a dry start.

Dave Neptune
Reply With Quote
The Following User Says Thank You to Dave Neptune For This Useful Post:
TimBSmith (07-19-2022)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Oberdorfer 202M7 Water Pump Impeller Replacement jsteele Cooling System 2 03-06-2021 02:40 PM
Water in Cylinders, Blown Head Gasket edwardc Troubleshooting 37 10-01-2010 05:13 PM
Use of Globe Impeller in Fresh Water System naiad33 Cooling System 1 12-07-2009 01:00 PM
Replacing water pump Bryan Howell Cooling System 7 11-27-2004 11:46 AM
Water pump impeller questions Mr. K Cooling System 1 11-16-2004 09:36 AM


All times are GMT -4. The time now is 05:39 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2022 Moyer Marine Inc.

All Rights Reserved