Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Owner Discussion Groups > Discussion Groups > Ericson

Reply
 
Thread Tools Display Modes
  #1   IP: 75.3.205.97
Old 04-14-2007, 02:35 AM
anglosax anglosax is offline
Senior Member
 
Join Date: Oct 2006
Posts: 74
Thanks: 0
Thanked 0 Times in 0 Posts
Erickson 35 rudder head

I know this is a little naughty, but the boat does have an A4 in it!
I know there are loads of people out there with 1970s sailboats perhaps with the same problem.
I need to replace the Chromed/bronze rudder head that connects the tiller bar to the rudder on this 1976 Erickson 35. The original may be Edson but there is no markings on it, and current Edson catalogs do not show anything that will fit the 3 inch rudder stock.
Any information to track one down will be apprieciated
Thanks Anyone
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Defective Head/Manifold Studs Don Moyer General Interest 2 09-29-2021 07:43 PM
Erickson 35 rudder head anglosax General Interest 2 04-15-2007 01:58 PM
additional persuasion to remove studs skhorleb Overhaul 3 03-12-2007 04:40 PM
Head Holes Jim Mac Overhaul 2 02-27-2007 06:54 PM
Removal of the cylinder head studs Unregistered General Maintenance 1 12-18-2005 12:34 PM


All times are GMT -4. The time now is 02:43 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved