Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Troubleshooting

Reply
 
Thread Tools Display Modes
  #1   IP: 174.198.4.58
Old 05-24-2023, 09:44 AM
Anchor1800 Anchor1800 is offline
Frequent Contributor
 
Join Date: Oct 2018
Posts: 6
Thanks: 2
Thanked 6 Times in 1 Post
EWDS - Raw Water Sensor

Hi everyone,

This question is specifically for folks who have installed the EWDS. I purchased mine toward the end of last season apparently just prior to MMI discontinuing it. I installed the pieces over the winter but have a concern with the raw water sensor.

The instructions call for it to be placed before the water pump inlet. When I place it here I get very little to no water flow, to the point that I have concerns with the engine overheating. So I removed it. Has anyone installed it after the water pump and had better success?

Additional info, I changed the impeller on my wayer pump a year ago, and I get plenty of flow when the sensor is not installed. I also verified the flow direction is correct on the sensor itself.

Any other pieces I'm missing?

Thanks!
Reply With Quote
  #2   IP: 76.176.224.167
Old 05-24-2023, 11:28 AM
ndutton's Avatar
ndutton ndutton is offline
Afourian MVP
 
Join Date: May 2009
Location: Torrance, CA
Posts: 9,619
Thanks: 198
Thanked 2,208 Times in 1,425 Posts
Just sent you a Private Message.
__________________
Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others
Reply With Quote
Reply

Tags
EWDS, Raw water, temperature

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Winterizing A4 and General Boat Preparation Mo General Maintenance 85 11-05-2021 06:26 AM
atomic 4 - 6 months of salt water - lost cause? taylor Overhaul 35 01-30-2021 10:32 PM
Flow Sensor Maintenance ndutton Cooling System 21 11-17-2020 12:38 PM
Head Removal rabbit hole Hiker_00 Overhaul 49 12-04-2012 11:33 PM
acid flush of Fresh water cooled engine skhorleb Cooling System 1 01-16-2007 10:07 AM


All times are GMT -4. The time now is 06:11 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved