#1
IP: 70.188.74.2
|
||||
|
||||
A4 gear box used on Palmer P60?
Or the other way around? I looked closely at the tiny pic of the gear box on a Palmer and it looks remarkably like ours. What gives?
http://www.boatcityyachts.com/palmer...ne%20parts.htm
__________________
Bill McLean '76 Ericson 27 :valhalla: Norfolk, VA |
#2
IP: 24.152.132.65
|
||||
|
||||
Our reversing gear was not manufactured by Universal but rather outsourced from Paragon. Apparently in morphing the International Harvester Farmall Cub tractor engine into the P60, Palmer used the same gear.
__________________
Neil 1977 Catalina 30 San Pedro, California prior boats 1987 Westsail 32, 1970 Catalina 22 Had my hands in a few others Last edited by ndutton; 08-03-2017 at 12:24 PM. Reason: Needed a comma, just one. |
#3
IP: 70.188.74.2
|
||||
|
||||
Ah ha! Thanks Neil.
__________________
Bill McLean '76 Ericson 27 :valhalla: Norfolk, VA |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
idler gear conundrum | azazzera | Overhaul | 2 | 07-02-2015 08:33 PM |
Forward and Reverse Gear Adjustment Issues | CraigRun | Reversing Gear | 12 | 05-17-2012 09:15 PM |
Reverse gear overheat?? | NorfolkRagbagger | Reversing Gear | 5 | 10-13-2010 09:20 AM |
Replacing gaskets on reversing gear and reduction gear housings | phorvati | Troubleshooting | 1 | 10-06-2008 02:10 PM |