Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > General Maintenance

Reply
 
Thread Tools Display Modes
  #1   IP: 173.252.12.213
Old 07-18-2015, 11:30 AM
ScottLynds ScottLynds is offline
Frequent Contributor
 
Join Date: Jun 2005
Posts: 5
Thanks: 3
Thanked 0 Times in 0 Posts
Belt sizes

Hi, I recently purchased a Pearson 323 that has an Atomic 4 engine. I am away from the boat but would like to purchased spare belts for the alternator and raw water pump before I go to the boat next. Can anyone tell me what the size of these belts are? I believe the engine has not been modified in anyway so both would be the original configuration.
Thanks, Scott
Reply With Quote
  #2   IP: 174.236.227.78
Old 07-18-2015, 08:31 PM
edwardc's Avatar
edwardc edwardc is offline
Afourian MVP
 
Join Date: Aug 2009
Location: Laurel, MD
Posts: 2,447
Thanks: 125
Thanked 517 Times in 341 Posts
Scott,

The 323 with the original Motorola 35 amp alternator takes a 25" belt. If it has the 55 amp alternator, it takes a 26".

The early 323s that had A4s came OEM with raw water cooling, so there is no "standard" pump arrangement for FWC.
I believe the Moyer add-on pump at the flywheel also takes a 26" belt.
__________________
@(^.^)@ Ed
1977 Pearson P-323 "Dolce Vita"
with rebuilt Atomic-4


Last edited by edwardc; 07-18-2015 at 11:23 PM.
Reply With Quote
The Following User Says Thank You to edwardc For This Useful Post:
ScottLynds (07-22-2015)
  #3   IP: 107.0.6.242
Old 07-19-2015, 12:05 PM
hanleyclifford hanleyclifford is offline
 
Join Date: Mar 2010
Posts: 6,800
Thanks: 121
Thanked 183 Times in 155 Posts
Talking

There can also be difference in width. Early engines ran 3/8" while later ones are 1/2".
Reply With Quote
The Following User Says Thank You to hanleyclifford For This Useful Post:
ScottLynds (07-22-2015)
  #4   IP: 107.0.6.242
Old 07-19-2015, 11:13 PM
hanleyclifford hanleyclifford is offline
 
Join Date: Mar 2010
Posts: 6,800
Thanks: 121
Thanked 183 Times in 155 Posts
Question

Check out some of the prices on this site - can these be for real? http://www.vbeltsupply.com/?pi_ad_id...FUgWHwodlz4EGA
Reply With Quote
The Following User Says Thank You to hanleyclifford For This Useful Post:
ScottLynds (07-22-2015)
  #5   IP: 173.252.12.213
Old 07-22-2015, 04:01 PM
ScottLynds ScottLynds is offline
Frequent Contributor
 
Join Date: Jun 2005
Posts: 5
Thanks: 3
Thanked 0 Times in 0 Posts
Thanks for the replies Scott
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Alternator belt Skywalker Electrical 3 06-23-2014 09:22 PM
Belt smoking with 55 Mando HighLife Troubleshooting 0 11-10-2009 09:46 PM
alternator belt m_galligan Electrical 2 07-24-2009 12:12 PM
Longer belt and MMI 55 amp alternator rigspelt Electrical 5 02-07-2009 07:34 AM
Can't remove old alternator belt m_galligan General Maintenance 15 10-06-2008 08:52 PM


All times are GMT -4. The time now is 08:43 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2022 Moyer Marine Inc.

All Rights Reserved