#1
IP: 64.40.61.1
|
|||
|
|||
Broken Valve Spring
I was getting water in my oil last June, The motor ran bad, bad noise, water in oil. traced to broken valve springs on #4, I replaced all the valve springs, a few valves, new head gasket, ran perfect untill now, last weekend the motor sounded bad, running on 3 cylinders. I checked tune parts good, I removed the valve cover plate and found #4 exhust spring broken again and #2 cylinder spring damaged, I dont know what can cause my valve springs to break, I warm the motor up and do not over rev it. Im going to replace all the valve springs again. I just dont know what the cause, any Ideas, Thanks Ed
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Checklist for a troublefree spring startup | Don Moyer | General Interest | 13 | 05-18-2022 07:59 AM |
Reverse Retaining Spring | Albert Solbes | Reversing Gear | 0 | 12-21-2005 12:20 PM |
Broken valve stem stuck in the valve guide | Unregistered | General Maintenance | 1 | 11-19-2005 08:26 AM |
Suspect broken intake valve spring | Scott Lynds | Troubleshooting | 1 | 08-20-2005 01:46 PM |
PCV valve (Indigo) question | Marty Levenson | Aftermarket Kits and Accessories | 1 | 02-18-2005 10:33 PM |