#1
IP: 67.180.232.255
|
||||
|
||||
FWC problem
Having a problem hooking up my fresh water cooling system. The sea water in and out is simple but it would seem that I have one place left to hook a hose and no hose to hook to it.
1-sea water in to in on sea water pump 2-sea water out to radiator 3-sea water out to exhaust injection 4-fresh water out to engine water pump in 5-engine water pump out to engine block Where do I connect the coolent in and what do I do with the remaing connection? Would appreciate any answer. Thanks Jess |
#2
IP: 216.115.121.253
|
||||
|
||||
Not enough to go on here.
Can you diagram the system for us, or maybe some photos? I'm thinking you are having trouble at the place where it comes off the ex manifold and goes to the heat exchanger, but I'm not sure. There's a drawing showing my general setup but with a cabin heater at: http://www.moyermarine.com/forums/showthread.php?t=3653 post #12 Russ
__________________
Whiskeyjack a '68 Columbia 36 rebuilt A-4 with 2:1 "Since when is napping doing nothing?" Last edited by lat 64; 02-13-2011 at 08:51 PM. |
#3
IP: 142.68.249.105
|
||||
|
||||
Does this help? Your setup and dimensions may vary. I made this up for my personal use, not to give advice.
__________________
1974 C&C 27 |
Tags |
cooling system, general |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Catalina Atomic 4 No Crank Problem Resolved | Don Moyer | Catalina | 27 | 01-10-2013 11:20 AM |
starting problem | gary randall | Troubleshooting | 4 | 10-26-2010 12:53 PM |
Start me up, please! Intermittent problem and need suggestions. | mgkkennedy | Troubleshooting | 7 | 07-30-2010 12:15 AM |
Intermittent problem in forward | BBATAAN | Troubleshooting | 5 | 08-29-2009 12:36 PM |
Timing Problem? | Stormy | Ignition System | 4 | 11-14-2004 09:36 AM |