Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Drive Train / Propellers

Reply
 
Thread Tools Display Modes
  #1   IP: 24.207.71.230
Old 06-20-2019, 11:45 PM
Sailhound Sailhound is offline
Senior Member
 
Join Date: Mar 2012
Posts: 21
Thanks: 13
Thanked 0 Times in 0 Posts
Shifting Adjustment Procedure

I have replaced my shifting cable with a Teleflex and now it moves like butter. HOWEVER, I seem to have lost 75% of my power in both forward and reverse. Here is the weird part, I feel the full detente going into forward and I am hearing the whine in reverse. I took it out for a test and had to sail it back to the dock.

I have bought the Moyer video on gear adjustments and something isnt clear to me. It is explained that adjust the notch collar will stiffen up shifting, but does it do anything in terms of slippage of the plates and cause them to fully engage? It's really weird that power is lost in both fwd and rev. Here are a couple of pics of the guts in Fwd, neut and rev. Thank you!
Attached Images
 
Reply With Quote
  #2   IP: 216.212.203.16
Old 06-21-2019, 06:46 AM
chapster5 chapster5 is offline
Senior Member
 
Join Date: Aug 2014
Location: Ont
Posts: 41
Thanks: 62
Thanked 9 Times in 6 Posts
Lots of folk's a lot smarter then me will chip in here but I will start.A few questions first which others will want to know.

How did every thing work and feel before you changed the cable ??
Did you do any other work during the time you were changing the cable, like say maybe an oil change ??
How long has the boat been sitting while doing this cable change ??

Again some smarter fellas will be along to assist.

hanng tight, Chapster5
Reply With Quote
The Following User Says Thank You to chapster5 For This Useful Post:
Sailhound (06-21-2019)
  #3   IP: 72.69.36.126
Old 06-21-2019, 08:02 AM
tenders tenders is offline
Afourian MVP
 
Join Date: May 2007
Location: Harlem YC, City Island, NY
Posts: 1,391
Thanks: 37
Thanked 214 Times in 143 Posts
I would observe that your symptoms are consistent with an embarnacled prop. This happens to us in the Northeast starting in early September, if the prop hasn't been cleaned since a May launch. It feels like the engine...but it isn't the engine.
Reply With Quote
The Following User Says Thank You to tenders For This Useful Post:
Sailhound (06-21-2019)
Reply

Tags
gear box, shifting, shifting adjustment

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
reverse gear adjustments gilbert landin Reversing Gear 12 10-17-2013 09:31 PM
How much force is normal to put into gear? JimM Reversing Gear 19 07-24-2012 03:49 PM
Reverse Gear Adjustment Procedure roadnsky Drawings and Schematics 0 06-21-2012 11:34 AM
Forward and Reverse Gear Adjustment Issues CraigRun Reversing Gear 12 05-17-2012 10:15 PM
Pressure on the drive lever to fully engage? Andy Mck Reversing Gear 6 10-08-2009 11:33 AM


All times are GMT -4. The time now is 07:31 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2020 Moyer Marine Inc.

All Rights Reserved