Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Reversing Gear

Reply
 
Thread Tools Display Modes
  #1   IP: 107.77.203.197
Old 11-04-2022, 02:28 PM
mwh2319 mwh2319 is offline
Senior Member
 
Join Date: Jul 2020
Posts: 16
Thanks: 6
Thanked 0 Times in 0 Posts
Reversing Gear Adjusting Collar rotating/adjusting tool? Screwdriver and hammer???

I need to rotate/adjust my Reversing Gear Adjusting Collar, but won’t rotate with medium force. Very tight. What tool or technique do I use? Have removed the Retaining Pin. I don’t want to just whack it with a screwdriver and hammer. Is there a special tool or technique for this?
Thanks
Reply With Quote
  #2   IP: 24.15.212.82
Old 11-05-2022, 04:44 PM
Sam Sam is offline
Afourian MVP
 
Join Date: Apr 2010
Posts: 286
Thanks: 345
Thanked 126 Times in 99 Posts
A couple yrs back mine was stuck on my early model A4. Never needed to adjust it anytime during last 40 yrs untill I noticed some forward slippage. Got it free by spraying it with PB Blaster penetrating oil. My problem turned out to be even simpler - loose "U" bolt on the outer sheath of the shift cable clamp. In the end I did not need the ring adjustment and for sure did not like the extra effort reguired to engage the detent with the shift handle.
Reply With Quote
Reply

Tags
adjusting collar

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:27 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2022 Moyer Marine Inc.

All Rights Reserved