Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > General Maintenance

Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   IP:
Old 05-21-2023, 11:28 AM
tworail tworail is offline
Frequent Contributor
Join Date: Feb 2019
Posts: 5
Thanks: 2
Thanked 3 Times in 2 Posts
Identifying oil pressure manifold and accessories

Does anyone recognize the manifold below, or is this just a standard off-the-shelf part from an auto parts store? I thought Moyer may have offered something like this years ago but can't confirm.

The gauge is obvious, what is the fat one in the middle? The far end looks to be a sensor to be wired to a cockpit gauge, but could it also be an oil pressure safety switch? The previous owner put all this together but didn't get to the wiring-up stage.

Incidentally, the oil pressure reads very low at idle, maybe 5PSI, so I do need to get in there and adjust the regulating valve. But I would also like to wire the rest of this up and make use of it.
Attached Images
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 08:04 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.

Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2023 Moyer Marine Inc.

All Rights Reserved