Bolt Kits

[Trés 30]

I've been replacing old screws & bolts in the engine.
Fly wheel cover, alternator support arm, various mounting brackets.
Instead of trying to pick through the offerings at the local hardware it'd be nice to have a kit that has all new replacements in the proper grades (apparently stainless isn't the best for everything). Maybe two levels of kit, "Overhaul" & "Rebuild".

In the Overhaul kit please include bolts/screws (& appropriate washers) for:
-Fly wheel cover
-Fuel Pump mounting bracket
-Coil mount
-Throttle cable mount (& cable securing bolts)
-Distributor screw
-Alternator support arm (both ends)
-(& maybe starter mounting screws, as well as water jacket side plate, even though it's a kit of its own.)
Did I leave anything out?

Basically everything above the oil pan. The Rebuild kit can be the Overhaul kit plus everything else.

Thanks,
Leon

[hanleyclifford]

Oil pan cap screws get rusted and rounded and in some cases are hard to access with a socket. I converted to allen headed bolts where possible. Don't forget the copper washers.